Final Datalogging but some Q's
 

I finally got the datalogging to work but I have some issues

I'm using a Generic USB Nokia Cable bought from a dude at the mall.
PM6 on a DOHC ZC

First off, some of the time, okay most, It won't let me save a log.
2: Vehicle Speed is WAY over what I'm going. When I'm cruizing a 105 KPH the laptop read 160KPH, if I'm doing 120, it read something like 190


And how do I get map trace to work, In my Datalogging tab the sensors at the top show action but the table does squat.

Anyone?

Re: Final Datalogging but some Q's
 

Oh ya one more thing, when at close throttle it read 100% and at WOT it read 10%

Re: Final Datalogging but some Q's
 

I assume you're talking about ECUControl?

Re: Final Datalogging but some Q's
 

Yes, sorry, Using most current version, with current NG55.

I've tried both open ECUcontrol seperately and with Pluggin from TE

Re: Final Datalogging but some Q's
 

I linked Nick to this thread, we'll see if he chimes in when he gets the message.

Re: Final Datalogging but some Q's
 

Thanks man,

Re: Final Datalogging but some Q's
 

The Current Version of Ecucontrol has some bug regarding the VSS and the saving of log file.

As for the USB connection, if you are having trouble, it's more because of the driver that sucks thant a ECUControl problem. Too many people are having problem dataloging using the USB cable. I Personally use the MAX233 TTL to RS232 adaptor and I never had a single datalogging issue.

Re: Final Datalogging but some Q's
 

Ya, I got no problems with the USB Connection, Works fine. I've tried serial connections and Max232 that never would work for me and now me new laptop only has usb so I went this route.