HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   fifth injector (https://www.homemadeturbo.com/engine-management-10/fifth-injector-50417/)

91accordti 11-21-2005 09:15 AM

Re: fifth injector
 
my brother ran a fifth injector on his camry a couple years ago...worked good f or a couple months, then the engine blew. Only problem is it is like a temp fix, not a tuning solution....my .02

surfer 11-21-2005 02:31 PM

Re: fifth injector
 
if you have the ability to control the original four injectors then the fifth will need no control other than on or off, if the fuel pressure stays constant, which it does, then you will have a steady and constant supply of fuel in boost which is where the standard injectors will overrun their maximum duty cycle without the aid of the fifth injector

http://cgi.ebay.co.uk/ws/eBayISAPI.d...MEBI%3AIT&rd=1


con 11-21-2005 08:48 PM

Re: fifth injector
 

Originally Posted by surfer


highroller you are gay, you need to read what i put before you continue to flame asshat, i explained what i was thinking of doing at the very top, TWICE. All i was asking for were ideas as to why it was not a good idea, which has now been explained to me

acually my idea would work and It explained why yours wouldn't because yours is not a progressive system. I also made it known that it would be much simpler to do it right then to ------ rig it together. I used sarcasm to get my point across but it was still a help to you. Just because somebody makes you feel stupid doesn't mean there not trying to help, your welcome. I am also not gay, I acually am quite found of the oppisite sex. 8)

surfer 11-22-2005 01:26 PM

Re: fifth injector
 
i dont see that your way would work better than what i suggested seeing as you still maintain the control over the original injectors but with a constant supply of extra fuel, either way though im getting answers that i want, cheers :6

d16t-hatch 11-29-2005 04:20 PM

Re: fifth injector
 
Im actually planning on running this type of set up on my car, except im going to run two extra injectors that are controlled by an ERL MF2 this is what turbonetics uses with thier fmax turbo kit. You can use a seperate presser sensor to make a 2d map, or you can use any sensor that runs on 0-5 volts, like a map or maf sensor to create 3d map. The mf2 is pretty cheap to i have seen them go on ebay for 50 bucks. Im just using this until i can afford hondata s300 and larger injectors.

RENR 11-29-2005 04:32 PM

Re: fifth injector
 
hahha this reminds me of my old setup.i ran a cold start injector (dont laughgh) hooked up to a rpm switch(yes a rpm switch) and it was in the intake piping. i ran 14psi on a stock y8 for a while using this setup. funny ----.oh but this was together with the hack and 450cc. blew the motor due to no timing control. fucker hauled ass though O0

cold start injectors arethe best!


All times are GMT -5. The time now is 01:05 PM.


© 2024 MH Sub I, LLC dba Internet Brands