f22 fule problem
i have a stock f22 with talon setup, with talon injectors need to know what to do to make it run rite. it runs bad with the talon injector, i was wondering if the resistor on the injector will work on this motor
|
Re: f22 fule problem
Whats your fuel managment?
|
Re: f22 fule problem
You should already have a resistor box on your engine, so the injectors should be plug and play with a little dremel action on the o-rings. Make sure they fit real snug. You need some kind of real engine management because I used to have an FMU on my f22a/dsm setup and it ran like complete ----. Once you get those injectors in, Id recommend getting a new ECU, I think po6's work from the civics which you have to reprgram for your engine then tune it, or Id recommend Emanage so you dont have to go through the hassle of getting a whole new ecu. Im running emanage and wideband o2 integrated on mine and it runs perfect with a/f ratios right where I want em.
|
Re: f22 fule problem
po6 chip, can i get it on ebay i saw a few but not sure.
|
Re: f22 fule problem
a po6 will work, you can run either uberdata or crome for on the cheap engine management.
|
All times are GMT -5. The time now is 04:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands