HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   Erratic cold idle (https://www.homemadeturbo.com/engine-management-10/erratic-cold-idle-21322/)

willahlborn 05-31-2004 07:31 PM

Erratic cold idle
 
When I turn on my car and it's not warmed up, my idle #1. is really high and #2. becomes erratic going between 1000 and 1500 rpm. After it's warmed up, it idles at 750 rpm like a champ, solid. I am using Uberdata, with cold idle set at 1000 rpm, running idle at 900 rpm, and standard idle at 750 rpm. Engine speed is now going as high as 2000 rpm when I first start the car. My ecu has closed loop mode disabled. I suspect my problem might be a vacuum leak. Any other ideas?

scttydb411 06-01-2004 09:31 AM

Re:Erratic cold idle
 
mine does the same thing cold...if it was a vac leak it would do it cold or warm.

88crxSi 06-01-2004 12:05 PM

Re:Erratic cold idle
 
thats because your FITV is letting air in when the engine is cold. set your cold idle to 2k and I bet it'll be smooth as silk.

tranceminister 06-01-2004 05:07 PM

Re:Erratic cold idle
 
It's possible and worth a shot, but from what I've learned the ecu really has minimal control over how the engine is going to idle.

88crxSi 06-02-2004 08:41 AM

Re:Erratic cold idle
 
the FITV is designed to let enough air in for the engine to idle at 2k for cold start. If your ecu at the same time is targetting 1k it'll will fall down and then jump back up. thats my view of the hole problem. hell It can't hurt to burn a chip and plug it in and try, right?


All times are GMT -5. The time now is 04:32 PM.


© 2024 MH Sub I, LLC dba Internet Brands