Which ECU form OBDII to I
 

I am going to look into ecu modding but am confused on the ECU to get. I have a 96 CX with a D16Y7 NON-VTEC. I was told P28 but that looks like its for a VTEC car. Can I use that without a CEL or should I get a P06. Thanks in advance.

Re:Which ECU form OBDII to I
 

On the same note can someone give me a list of what I need to buy(with part numbers)to socket the ECU or at least a link to where there is one.

Re:Which ECU form OBDII to I
 

whats ur cs name

Re:Which ECU form OBDII to I
 

=CSF=Homicide , but can you help me with my questions?

Re:Which ECU form OBDII to I
 

first of all are u gonna run turbo?

Re:Which ECU form OBDII to I
 

If you *NEVER* plan to slap a VTEC head on that beast, then get a P06.

Otherwise, get a P28, and disable VTEC in the code until you to get a VTEC head.

Re:Which ECU form OBDII to I
 

Thanks for the response. I am not confident I could do all the work needed to chip the ECU. I dont know how the prom burning works. I have read it but it looks like I will have to buy some type of burner tool. After that do I just plug my laptop in using the serial port or do I have to remove the chip everytime I adjust things? On the other hand I am confident I can do the hack. Maybe for my first turbo I will do that becasue I fully understand how it works and how to install it.

Re:Which ECU form OBDII to I
 

Well it's up to you. It also depends on the ammount of boost you plan on running. You'll most likely be having to remove the chip and re-burn it everytime you want to change something. You could use a ROM-ulator with your laptop, but that will require quite a bit more time, money and knowledge to do.

Re:Which ECU form OBDII to I
 

...unless you're using TurboEDIT, TM. ::) HA!

No, the AFC hack will be fine for your first setup. Have at it. Then, progress from there.