turboD16crx

Ok i have the xenocron usb datalogging kit downloaded and installed the drivers, when i run ecucontrol it says its connected but i'm not getting any info at al,l my com is right and so is the speed anything im missing??
thanks

SpankedYA!

J12 ownage?

turboD16crx

nope j12 has been taken out i notice only one light on the converter comes on i think its for the tx signal isnt there suppose to be a rx light too?

SpankedYA!

If you twist the Rx and Tx together can you type in hyperterminal?

turboD16crx

I unpluged it and pluged it back in for a second the red and green lights came on then went off. when i hit start logging the green light blinks but i'm not getting any data. hyperterminal?

SpankedYA!

Hyperterminal is a program in windows. You should be able to twist the rx and tx together and then plug in the usb. Open programs, accessories, communication, and hyperterminal. Click file, properties and then select the com your usb adpater is on. When chosen you should be able to type and it will come up on the screen.

turboD16crx

Ok thanks i'll do it tomorrow and post how it went

ifly87

I just tried the same thing becasue I cant get mine to work and mine wont type in hyperterminal, why is this and what does it mean?

turboD16crx

no luck cant type anything when i connect no lights come on but when i disconnect both lights blink once. i left the bits per seconcd (9600) to default ill play around with them and see what happens

SpankedYA!

If you have them twisted together and you can't type after choosing the correct COM port then you have a problem with the cable iteself or its not installed right.