HomemadeTurbo - DIY Turbo Forum
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   eCtune and jaw wideband reader (https://www.homemadeturbo.com/engine-management-10/ectune-jaw-wideband-reader-94854/)

MAJORAHOLE 08-29-2008 02:09 PM
Re: eCtune and jaw wideband reader
 
Originally Posted by TorganFM
Just the base reading from the JAW (1.02V) when I'm running pig rich had the offset too. Something else happened with the JAW though... If I let the car idle after warming up on the Fook's basemap the JAW would show 34.28 or whatever the max lean should read. I bet if I hooked it up and got it going it would show 34 AFR at times. I'll just end up getting an LC-1 when I crank the boost past 11psi. This bitch screams as it is and has for a year so I'm not concerned about being technically 'untuned.' Plus 30-35 mpg isn't really pressing me to tune for mileage.
ya, i sold my jaw with sensor for $110, and just bought an LC-1 w/sensor for $80. but i dont have datalogging, never could get that ---- to work right. guess i'll need a hulog thing

TorganFM 08-29-2008 02:13 PM
Re: eCtune and jaw wideband reader
 
Yeah that's how I've been datalogging, through the ecu. I never even bothered with the JAW's datalogging.

blowngsr1wn 09-01-2008 12:19 AM
Re: eCtune and jaw wideband reader
 
i have used the jaws data logging, not the greatest but it worked. i really don't want to buy a lc-1. I would rather get what I have to work but if it becomes a necessity then I will. I have yet to try what Mr. Davis suggested but I will Mon, or Tues


All times are GMT -5. The time now is 06:04 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands