DSM injectors install
I have a civic w/ OBD2. im kind of confused when it comes to resistor box install :'( I read all of these
http://www.hstuners.com/forums/showt...threadid=11436 and http://www.sohchonda.com/v-web/bulletin/index.php?pid=4 but I like this on the most https://www.homemadeturbo.com/forum/...?topic=51336.0 ok so all jeff dose is take the 4 injector wires and 1 12v wire and attach the resistor box, right ? it seems kind of too easy, so if im missing something let me know. and ill be using blue top injectors with DSM clips. |
Re: DSM injectors install
Yes it is easy, but you take the 4 yellow/black wires from the injectors (1per injector) and wire them into the 4 black wires on the resistor box. Then wire all 4 of the remining yellow/black wires from the harness to the red wire on the resistor box (they all need to be spiced together).
Another way of lowering resistance if a resistor box isn't handy is to make a run to Radio Shack and splice in 4 10watt 10ohm inline resistors to each injector on the yellow/black wire. |
Re: DSM injectors install
thanks, but i wonted to make it look clean and do what Jeff did. de-pin the injector wires and use a connector. is that all that has to be done ???
|
Re: DSM injectors install
10 ohm 10 watt shack resistors for teh win!
|
Re: DSM injectors install
Im not a honda guy, so the color coding doenst work for me... do the resistors go on the positive or negative side of the injector coil? Im guessing positive, but I just want to verify. Actually, It really shouldnt matter, But I dont feel like cooking my $50 DSM injectors either.
|
All times are GMT -5. The time now is 09:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands