DSM 1g 450cc injectors in b16a. help plz
#1
DSM 1g 450cc injectors in b16a. help plz
Hi
i'm thinking of buying some 450cc injectors for my b16a civic ef9,
i've searched and found this thread https://www.homemadeturbo.com/tech_p...ors/index.html
what i dont understand is where do i buy the napa injector seal kit from?
i'm from uk and cant really seem to find them on internet.
it does say something about boring out the seals but which seals do i bore out?
i've found this recently: http://www.slowboyracing.com/more.ph...09440441cc17b5
now do i buy them seals from the link above and then bore out?
help needed plz
thanks
i'm thinking of buying some 450cc injectors for my b16a civic ef9,
i've searched and found this thread https://www.homemadeturbo.com/tech_p...ors/index.html
what i dont understand is where do i buy the napa injector seal kit from?
i'm from uk and cant really seem to find them on internet.
it does say something about boring out the seals but which seals do i bore out?
i've found this recently: http://www.slowboyracing.com/more.ph...09440441cc17b5
now do i buy them seals from the link above and then bore out?
help needed plz
thanks
#2
Re: DSM 1g 450cc injectors in b16a. help plz
Napa is a large automotive parts dealer. They also sell thier own brand of parts, with their own part numbers. The seal you may need is the lower one in the manifold. If yours are in good shape then you are just fine.
Bore the lower seal.
Randy
Bore the lower seal.
Randy
#3
Re: DSM 1g 450cc injectors in b16a. help plz
thanks for your help
anyone got the part number for the napa seals?
i've been on the napa website but it asks for part number which i dont know.
i'll have to have a look if my seals are in good shape. if not then i'll try local honda dealer and see if i can buy the lower seal in manifold
anyone got the part number for the napa seals?
i've been on the napa website but it asks for part number which i dont know.
i'll have to have a look if my seals are in good shape. if not then i'll try local honda dealer and see if i can buy the lower seal in manifold
#4
Re: DSM 1g 450cc injectors in b16a. help plz
If you have autoparts stores in the UK (I dont see why you wouldnt) then seals from some other company will be fine. You dont need the Napa ones, you probably dont need any at all, the main reason to use new ones, is so that you dont screw up what you have.
The inside radius of the stock B16 seal needs to be bored out to accept the larger injector. A lot of people use the little sanding drum from a rotory tool, just a few passes should do it. Buy the injectors and and sand the insides until they fit, not that hard
The inside radius of the stock B16 seal needs to be bored out to accept the larger injector. A lot of people use the little sanding drum from a rotory tool, just a few passes should do it. Buy the injectors and and sand the insides until they fit, not that hard
Thread
Thread Starter
Forum
Replies
Last Post
Dweezil
Turbo Parts For Sale
8
10-01-2007 10:37 PM
bambbrose
Turbo Parts For Sale
6
07-09-2006 01:29 PM
2fast4udude
Wanted
1
05-18-2005 04:26 PM
Chris Harris
Turbo Parts For Sale
2
09-08-2004 01:31 PM
Boosted075CRX
Turbo Parts For Sale
1
07-10-2004 10:49 PM