dohc zc and a pm6
11-15-2008, 09:34 PM
#2
3.0 BAR
Join Date: Dec 2006
Posts: 1,505
Re: dohc zc and a pm6
Don't know if it helps any, but I ran a pr7(I believe that's the right code) ecu from a d16a1(usdm zc) on my d16a6 back in the day...I had read somewhere that I would see some slight gains from doing so...My buddy had recently totaled out his 89 model Teg RS, so I grabbed it from him....
11-16-2008, 10:00 PM
#7
1.0 BAR
Join Date: Jan 2006
Posts: 326
Re: dohc zc and a pm6
Originally Posted by Joseph Davis
Since the exhaust cam sensor is in alignment, PM6 works fine albeit runs lean.
i'm running a dohc zc with a walbro & stock fuel pressure regulator b/c i'm a cheap ***. would i be better off running the pm6 since it leans it out? or should i stick with my pg7
11-17-2008, 03:34 AM
#9
0.0 BAR
Join Date: Mar 2006
Posts: 0
Re: dohc zc and a pm6
Originally Posted by Chaos325
If it is the blacktop zc then use the 88 89 integra pg7 ecu. If its browntop then use the 86 87 integra pg7 ecu. Pm6 shouldn't work unless its chipped because of the zcs exhaust cam sensor.
pm7 FTMFW
