do i need stock 02 with a wideband
 

i got a b18a1 the stock 02 sensor was originaly in the stock exhaust manifold. the wire for

the 02 sensor fell out, and there is no place on the turbo header to weld on a new bong.

i have a new bong at the end of the turbo downpipe where the wideband sensor is going
.
everyone is telling me to modify the exhuast manifold for the stock 02 sensor ! im thinking

spice the wideband sensor into the stock 02 sensor wire ? or turn off 02 sensor in turbo

edit and run it as a standalone ? my head is about to implode :confused:

90 integra turbo'd obd0 , my wideband if it helps ~~~~>52mm ELITE 10 COLOR LED WIDEBAND AIR/FUEL RATIO GAUGE - eBay (item 370393630895 end time Apr-04-11 17:59:40 PDT)

really ? how can it be diy when no one helps .....

None of that make sense. If you have a obd1 ecu and its chipped, just hook up your wideband and throw your narrowband and your neighbors dog. Turn off the O2 monitor with turbo edit if you can, i know i can with crome and i have a innovate LC1. What are you using to Datalog?

Its a bung, not a bong and you don't need to add one, just screw the WB in the NB place. If you have bong on your exhaust what do you do to keep the water from evaporating to fast. Maybe you were using a bong when you wrote your question.

Just so you know, all the smart guys don't log in much anymore. You needed to be on here like 3-4 years ago and you would get answers quick. I am good enough smart to help you with your questions but the egg heads i guess have better things to do plus i know they got tired of answer all the same stupid questions that lazies wouldn't look up. And just so you know, all your questions are already answered you just have to look for it. I was once a Grasshopper as you are now. Never fear checking out www.pgmfi.org also as all is answered there also. Put the pipe down!