dizzy question?
 

ok i have a d16a6 si distributor on my z6 right now its still obd0, i can use a dizzy from a 92-95 ex or si right? all i would have to do is just change the plugs?

Re:dizzy question?
 

I think you would have to swap over the rest of the OBD1 setup but I'm not completely sure on this one.. someone else care to back me up?

Re:dizzy question?
 

Yea you got to run the other oBD1 goodies, ive never heard of people changing the plugs, i would think that oBD1 has more wires??? Maybe check into it more.

What are you trying to do? Are you trying to get it so that your dissy has more than one bolt hooked up??

or trying to convert to obd1?? <--- thats too much of a pain for me!!! and obd0 is great!!!

Re:dizzy question?
 

naw im staying obd0 but i just wanted it to look cleaner and not all rigged u know.

Re:dizzy question?
 

just abuse some bolt holes on the dizzy or tap the head in diff spots.. you can still use more then 1 bolt if u wanted to

Re:dizzy question?
 

http://www.newbieforces.com/files/DSCF0502.gif
http://www.newbieforces.com/files/dizzyad.gif
this is what i did and it works great

Re:dizzy question?
 

Or from what i hear, with a Y8 head, the obd0 distrib lines up with all bolts!

Re:dizzy question?
 

92+ dizzy's have more teeth on the dist gear.. an obd-0 dizzy will not work w/ a obd-1 or obd-2 system.

and a obd-1 or obd-2 dizzy will not work on an obd-0 system.

Re:dizzy question?
 

What "teeth" on the dist gear? There are no "teeth". It fits into an offset slot.

Re:dizzy question?
 

Hes refering to the cyl/crank/tdc sensor pickups inside.

OBD0 is a 16 tooth vs 24 tooth for OBD1. Thats why you cant mix. Dizzy has to match ECU.