Soldered up the USB, got the drivers, but can't seem to get datalogging to work . . . . what could be the problem? I tried different ports, and it still doesn't seem to wana work.

HELP so I can tune.

 

do you have a bin open?
did you select the com port in uberdata under the datalogging tab
did you select the sensors you want to moniter

 

thanks guys but I did indeed do the 3 things mentioned above, and still nothing.

I opened the bin I currently am running in the car, and I checked all the items or parameters that I wanted and still nothing. Could it be anything else?

 

did you try all the com port options
is the led on your ecu on

 

yeah I tried them all . . . most said error, only COM Port 1 worked as far as no error, but it still didn't read. As far as the led, what led would that be?

 

Plug in the USB cable and go to device manager. See which COM port its really on. If all are taken that Uberdata can use, force one from its position and force that one into it. Some of the widebands need that trick.

 

i'll give that a try. Now what about the solid CEL when dissabling the o2 sensor, and dissabling closed loop? The car runs great like that, just need to fine tune the boost portion, but i'll be testing out the ecu, and usb stuff today and report back.

Thanks

 

What kind of wideband are you using?

 

PLX 300