datalogging ??s wideband??s
 

To datalog on my computer i can do it on uberdata? Does the datalogging just do one run in each gear or how does it graph it?

If i were to get a wideband sensor which one do i need to hook it up instead of the narrow band?

Do i just pick a thing in uberdata saying i have a wideband sensor or do i have to add resistors and other bs to the ecu?

Re: datalogging ??s wideband??s
 

bump please.

Re: datalogging ??s wideband??s
 

You do it threw the Uberdata program yes. Open up Uber on your laptop...connect to the ECU with the car running (make sure all parameters are set properly) and go to town

I'm preferential to the Innovate Widebands, but any wideband with a 0-5v output will work for you

Connect the WB output to pin D14 on your ECU, pick the proper WB or set it up in Uber and it *should* log correctly

Re: datalogging ??s wideband??s
 

With the Innovative(LM-1) it can datalog inside of itself, correct?

I'm assuming that using a laptop of course would be easier, but can you do the same sort of things with the LM-1?

Re: datalogging ??s wideband??s
 

Yes, it can. It would basically be worthless to datalog with the LM-1 itself unless you have the RPM convertor.

If you have a Honda, it is much easier to use Uberdata or Crome to datalog and make changes. But if you have the LM-1 and RPM convertor, you can tune any car with just the Innovate unit itself.