DATALOGGING HELP
#1
DATALOGGING HELP
Alright before u guys start goin off saying search well i did and everything i came across of didnt help...so im using crome..i have my map and done...i also have ecucontrol...i cut the j12 jumper out....and set the settings in ecucontrol to com1 9600, 8n1...i hit connect and start logging and nothign there?
my wires colors go like this on my serial cable
1 - brown -ground
2- orange
3- red
4- yellow
now alos since i cut out j12 does it have to be put back in once im done datalogging....
also im and using a lc-1
my wires colors go like this on my serial cable
1 - brown -ground
2- orange
3- red
4- yellow
now alos since i cut out j12 does it have to be put back in once im done datalogging....
also im and using a lc-1
#6
Re: DATALOGGING HELP
Are you getting any kind of signal or connection? I couldn't connect to Crome and realized I had my 2nd & 4th wires backwards (not power or ground). You might want to try switching them.
I've never used ECU Control, but does your COM port speed have to match the ECU Control speed (if they have one)?
Have you tried driving and datalogging at all, or are you idle in neutral?
I've never used ECU Control, but does your COM port speed have to match the ECU Control speed (if they have one)?
Have you tried driving and datalogging at all, or are you idle in neutral?
#8
Re: DATALOGGING HELP
Originally Posted by xenocron
Uberdata = J12 needs to be IN TACT
Crome/ECU COntrol/Freelog = J12 needs to be cut...and datalogging needs to be specifically enabled in the ROM
Crome/ECU COntrol/Freelog = J12 needs to be cut...and datalogging needs to be specifically enabled in the ROM