I can not get my hulog cable to connect to datalog with cromepro. I know the cable works because i can datalog with a standalone program with that cable. I have installed the RTP for data loging in crome pro and also removed the check sum thing. i have the latest version of crome pro as well. but still can not connect. i have tried changing comm ports and everything.. nothing works.

 

you going off the ports in the front of your comp or the rear

 

its a laptop so they are on the side.. i made sure in crome pro that its set to comm 3 and the same way in the laptop settings.

 

Well problem solved. The default setting on my Crome pro were all the same as Kevins(projekteg) EXCEPT for data bits. Mine was set at 4. I changed it to 8 and just like magic DATAlogging works. I have went threw everything a million times. It wasnt untill he told me what all the settings were saposed to be that i was able to fix the problem. The good thing is that i learned all about how to change comm ports and all that jaz.. But hey thats how I learn.

 

Good to see you got it worked out.

Dont know if you'll run into the same problems as I do when I start a new session of CROME and try to connect to ecu w/ a failure, but this is what works for me %100.

Start CROME
plug in usb cable
go to settings/real time programming >test connection - failure
unplug/replug usb
test connection again - success

 

yep same thing for me.. got to start it then failure then unplug then plug in.. then it works.. quirky but it works

 

alright jeff, since u got it working now, when we gonna do some street tuning?

 

anytime ya want man only thing i have left to figure out is how to hook my LM1 in to the ECU but i think that shoudl be easy..