datalogging...
 

ok we have the pins in the ecu...and plugged the xenocron datalogging cable into it and into the laptop...we cut j12...we've tried to run freelog and uberdata....we thing on the cable flickers a green light but we're not getting any response from the laptop...what could be the problem?

Re: datalogging...
 

Uberdata needs the J12 jumper connected for datalogging to function.

Is this a serial or USB datalogging cable? Could be a com port issue..

Re: datalogging...
 

well they said we had to cut j12 for freelog...i'm tuning with crome and someone said i had to use freelog to datalog for crome...

i'm using the xenocron usb datalogging cable...and it's the com2 port...i had chris set it up for me but he couldn't get it to work for some reason.

Re: datalogging...
 

Yea freelog needs J12 cut, I just mentioned before because you said you were trying uberdata too which won't work with it cut.

Sheeit, if Chris can't figure it out...

Try switching it to a different com port in your windows device manager. It's worth a shot, there might be a conflict on com 2. Try com 3 or 4.

Re: datalogging...
 

this chris is crxb16t/b16crxt (whichever one) on here...does crome have a datalogger?

Re: datalogging...
 

Crome pro does. But it's not in the free version.....Are you sure you have the cable connected to cn2 correctl?

you could have the plug in backwards.

Re: datalogging...
 

there were numbers on the cab'e...and numbers in the ecu...so i'm guessing if we match those then it should work...what do i have to install on my computer for the xenocron usb cable?

Re: datalogging...
 

well you have to download the nokia drivers...you can find them on -------------

Re: datalogging...
 

i can't see to find it...i downloaded the "old" driver for the usb cable...but when i open the device manager on my computer it tells me that the right hardware isn't installed

Re: datalogging...
 

someone help me out...i tried cuddle and ecu control aswell...and the green light doesn't ecen light up when i use those