d16y8 fuel rail + dsm 450s
 

i used the top, botom, and tip o rings from the napa kit, not sure if any of that is why, but my fuel rail doesnt sit down all the way on the standoff/threaded things the sit on, it looks like its higher on the front them back, its not llevel to what it should be sitting on.. is this normal?

Re: d16y8 fuel rail + dsm 450s
 

its been awhile since i've done mine, but i remember having to push the fuel rail down pretty hard. I used vasoline to lube the o-rings to slip them in, that mught help a little bit. Post some pics if you can.


Mark

Re: d16y8 fuel rail + dsm 450s
 

ya i tried pushing the injectors into the fuel rail 1 at a time and it worked a little better, i put them in the manifold 1st and tried pushing the rail on to the injectors as hard as i could for like 10minutes and it was n ot happening

Re: d16y8 fuel rail + dsm 450s
 

not a big deal as long as you get a good seal, try stacking washers under the fuel rail to semi even out the rail :y

Re: d16y8 fuel rail + dsm 450s
 

good idea..