Cromophobes unite!
04-14-2006, 02:19 PM
#1
1.0 BAR
Thread Starter
Join Date: Aug 2003
Posts: 489
Cromophobes unite!
Anyone know why the changes I make to the boost tables section do not save or at least not seem to? I select "retard ignition by .75 degrees/lb boost" and "adjust for turbocharger eficiency 120%" ......press ok, and save the changes only to return and the option "Do not make changes" is selected for both the ignition and fuel.
What the hell is going on?
Also, under the fuel modifier calculator under both the "injector" and "engine capacity" sections any changes I make are either altered or returned to original settings.
I put in a new value of 450 for injector size, old engine capacity of 1834 (ls map, p30 base) and new engine capacity of 1972, click ok, and save changes
I open the fuel modifier calculator agian and the new injector size has changed from 450 to 418 and the engine capacities are both at the original 1595 setting.
The car is a 2.0 prelude hence the engine capacity settings.
My brain hurts from reading a ton of posts and I still have no answers.
What the hell is going on?
Also, under the fuel modifier calculator under both the "injector" and "engine capacity" sections any changes I make are either altered or returned to original settings.
I put in a new value of 450 for injector size, old engine capacity of 1834 (ls map, p30 base) and new engine capacity of 1972, click ok, and save changes
I open the fuel modifier calculator agian and the new injector size has changed from 450 to 418 and the engine capacities are both at the original 1595 setting.
The car is a 2.0 prelude hence the engine capacity settings.
My brain hurts from reading a ton of posts and I still have no answers.
Thread
Thread Starter
Forum
Replies
Last Post
