crome w/ willems burner
 

we burned a obd0 program from turboedit worked fine then we tried a crome bin an a uberdata both throw a solid cel .only plugin for crome is the L/c-f/s-s/l .using sst chips id verify but the buffer has a error?

Re: crome w/ willems burner
 

i've used crome with my willem burner. you sure you got the chip in there correctly? and all the settings are correct within willem? which board do you have and which software

-Luke

Re: crome w/ willems burner
 

eprom .97 we are running it off my pc do you use your printer? also when you jump it to erase it doesn't switch the light over

Re: crome w/ willems burner
 

it says i need to change the value of my device but i cant find that setting

Re: crome w/ willems burner
 

Have you tried saving the bin file and loading it into the willem burner program and burning from there? Or just through Crome?

Re: crome w/ willems burner
 

loading the bin though willem then trying to burn it.are the sst burnovers?

Re: crome w/ willems burner
 

Depends on the chip. If they're designated a "otb" chip, then yes...only once. I use the SST27sf512's...they're re-burnable. If it has a code like "27c256 or 27c512" it usually means it's either a uv erasable if it has the window, or a otb...one time burn.

Re: crome w/ willems burner
 

crome and uberdata are not ment for obd0 That should be the reason for your cel light.

Re: crome w/ willems burner
 

Thats pretty ------- good for a n00b!!!

Exactly.

Turbo edit is for obd0
Crome and uberdata odb1

Re: crome w/ willems burner
 

The way I read it was he used it for an obd0 burn just fine, but had issues when he tried an obd1 burn.