Code 0 woes
ok so i took my chipped p06, which ran a can perfectly, in the past and put it in my hatch and it simply wont get out of code 0,
I changed the battery in the ostrich 1.0 and the hulog is setup fine but i keep getting code zero!! crome 1.5 free, 99 civic dx I keep looking for the pgmfi wiki but i just cant find it and any links to it are dead, I remember that it had a great troubleshoot strips i took hen switching ECU - car off - neg terminal off -remove ecu -plug new in -reconnect ECU ECU is laying on the floor isnt touching the body of the car, could this have something to do with it? |
Re: Code 0 woes
Originally Posted by speedjunky01
ECU is laying on the floor isnt touching the body of the car, could this have something to do with it?
Do you have a GOOD ground at the T-stat housing? |
Re: Code 0 woes
Sounds like a problem with the car, or the conversion harness if it's not a known good unit.
There could be a legitimate problem with the ECU that just manifested, but it's not anywhere near as likely. Testing it again on another car is a good ideam just to be safe. Can you give a timeline of events, or recent modifications to your Civic? |
Re: Code 0 woes
when i use a bin thats base p30 it seems to work just fine, really wierd.
o well i just copied the tables over to a p30 base and al is well. thanks for the help guys |
Re: Code 0 woes
Groovy.
Might just have been a glitch when the GUI compiled the original .bin |
All times are GMT -5. The time now is 04:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands