Chipping question
Well, I have a PM6 ECU that i would like to chip. And i read from PGMFI.org that you have to change couple of capacitors? Is this true? I'm totally confused? I thought I only have to replace the 28 pin chip only?
|
Re:Chipping question
Originally Posted by EG6Sleeper
I thought I only have to replace the 28 pin chip only?
It would help if you gave us a link to the info that was confusing you...my bet is you were reading about OBD1 chipping. |
Re:Chipping question
|
Re:Chipping question
Does PR4's require more than the basic OBD0 chipping?? Like does it need additional capacitors? Etc???
|
Re:Chipping question
No, obd0 PR4's and PM6's both just need a socket, unless you want datalogging too. If so, you have to solder in 4 pin headers to the CN2/CN3 connectors as well. (that's how I do it anyway)
|
Re:Chipping question
there's 5 points at cn2/3, you only use 1,2, and 4 with a nokia cable, and 1-4 with a max 233
|
Re:Chipping question
Originally Posted by projekteg
there's 5 points at cn2/3, you only use 1,2, and 4 with a nokia cable, and 1-4 with a max 233
|
Re:Chipping question
thanks for the response guys... So OBD1 ECU needs extra parts?
|
Re:Chipping question
Originally Posted by EG6Sleeper
So OBD1 ECU needs extra parts?
|
All times are GMT -5. The time now is 06:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands