chiping ecu
i heard that i can increase the hp of the stock d16z6 or d15b7 by burning new chip.
is that right ? and if that right where can i get the bin file for this modelated chip ? note i need for the stock engine not turbod engine |
Re: chiping ecu
go ahead and bend over.
|
Re: chiping ecu
what you mean with bend over ?
|
Re: chiping ecu
the last thread ive readed in this section, ive saw you giving some advices to another guys and i see this thread asking that.. :3...
are you runing with ecu chipped? ::) |
Re: chiping ecu
please note that my country is poor in info about t6urbo and chipping.
i was running safc2+ big injectors (450) and i decided to chip my ecu. so i bought the burner (william) and bought free eperom and iam in my way to chip to myself and to some friends. and please note how hard it to do every thing alon. without helping of anyone. i bought my turbo from ebay and i installed it with my self. and bought safc from e bay and installed it with my self and i bought the burner from e bay and iam still learning how to chip. and as you see my engrish :) is not perfect so i always had problem and dont ask me much please because when you ask me much you remember me with the two eggs which between my legs :D :D :D |
Re: chiping ecu
one of your friends walter?
|
Re: chiping ecu
Originally Posted by hany
as you see my engrish :) is not perfect |
Re: chiping ecu
Originally Posted by hany
please note that my country is poor in info about t6urbo and chipping.
i was running safc2+ big injectors (450) and i decided to chip my ecu. so i bought the burner (william) and bought free eperom and iam in my way to chip to myself and to some friends. and please note how hard it to do every thing alon. without helping of anyone. i bought my turbo from ebay and i installed it with my self. and bought safc from e bay and installed it with my self and i bought the burner from e bay and iam still learning how to chip. and as you see my engrish :) is not perfect so i always had problem and dont ask me much please because when you ask me much you remember me with the two eggs which between my legs :D :D :D Good for you, most people here prolly didnt have help either, I didnt, it just took a -----load of research. Have fun learning how to use that willems burner, its a bitch, but once you figure it out you will feel like a retard as to how easy it really is. |
Re: chiping ecu
you dont get power by just chipping the ecu.
you have to tune. read the stickies. |
Re: chiping ecu
Originally Posted by jeffsciv23
one of your friends walter?
|
Re: chiping ecu
Originally Posted by mike94se
Buk's father :S
you make me laugh from my heart and with high sound ;) ;) |
Re: chiping ecu
Originally Posted by hany
:D :D ;D ;D
you make me laugh from my hard and with high sound ;) ;) |
Re: chiping ecu
sorry i mean heart
|
Re: chiping ecu
With I/H/E you arent going to see any gains from a chip and minimal from tuning the car to death. IMO it really isnt worth it until you get into things like Intake Manifolds, Cams, Larger TBs, Injectors, cam gears, porting...etc that the stock ECU stops being able to keep up to the air flow demands of your motor.
|
Re: chiping ecu
Originally Posted by xenocron
With I/H/E you arent going to see any gains from a chip and minimal from tuning the car to death. IMO it really isnt worth it until you get into things like Intake Manifolds, Cams, Larger TBs, Injectors, cam gears, porting...etc that the stock ECU stops being able to keep up to the air flow demands of your motor.
|
Re: chiping ecu
Originally Posted by jeffsciv23
from your WHAT? :o. rule #1 no gay ---- ;)
|
Re: chiping ecu
what you mean with I/H/E ?
|
Re: chiping ecu
Originally Posted by hany
what you mean with I/H/E ?
|
Re: chiping ecu
Originally Posted by SloS13
What hole have you been hiding in.
|
Re: chiping ecu
Originally Posted by jeffsciv23
one of your friends walter?
|
Re: chiping ecu
Originally Posted by hany
what you mean with I/H/E ?
|
Re: chiping ecu
Originally Posted by ososlohatch
where the ---- are you from ? cambodia ?
|
Re: chiping ecu
Get fucked by a camel ::)
|
All times are GMT -5. The time now is 03:18 PM. |
© 2024 MH Sub I, LLC dba Internet Brands