chip burning problem
 

im using willem burner;and when i try to burn a chip it says ERROR: WRITE SECTOR 0

Re:chip burning problem
 

same thing happens to me with my batronix

try a different computer

Re:chip burning problem
 

why is it cause of windows XP ;and i only have one computer :'(

Re:chip burning problem
 

make sure you get the newest version of the software for the willem. I tryed burning chips on the older versions and none of them worked except for the new one.

Re:chip burning problem
 

Also try erasing the chip (if an eprom) an/or try using another eprom. I've had some faulty eproms give me programming errors etc., but others work fine.

Re:chip burning problem
 

ive tried 3 diffrent chips

Re:chip burning problem
 

try ur friends computer or go to the library and use it there ;)

Re:chip burning problem
 

Im successfully burning with my Willems this is what i've found to help:

Make sure you jump 3&31 for 29c chips
Use Ver 97g of the software
Turn off virus ----
Disconnect from the internet (i've found that mine wont burn if i'm online)

Re:chip burning problem
 

weres jumpers 3 & 31 at

Re:chip burning problem
 

on this zif socket, pin 3 is the third down from the top on the left side, pin 31 is the second pin down from the top on the right side. Just put a piece of wire connecting them.