Chip Burner wont burn... help!
11-13-2005, 12:48 PM
#3
3.0 BAR
Join Date: Mar 2003
Posts: 4,217
Re: Chip Burner wont burn... help!
I know nothing about the wilhelm burner, but with the moates you have to plug the burner in and place the chip in before you open the program and then it will read or burn the chip.. try doing that and see if it works.
11-14-2005, 02:52 PM
#8
0.5 BAR
Join Date: Jan 2004
Posts: 73
Re: Chip Burner wont burn... help!
Is it a willem dual power or a willem universal? Make sure you read the willem walkthrough if you haven't. What chip are you using? That could be the problem. Make sure you have the chip in correctly. If all else fails, do a search for willem. Go to the willem site and read through their forum too. All the information you need is already out there, you just have to search for it.
11-15-2005, 04:39 AM
#9
0.5 BAR
Thread Starter
Join Date: Oct 2005
Posts: 89
Re: Chip Burner wont burn... help!
Originally Posted by bob06
Is it a willem dual power or a willem universal? Make sure you read the willem walkthrough if you haven't. What chip are you using? That could be the problem. Make sure you have the chip in correctly. If all else fails, do a search for willem. Go to the willem site and read through their forum too. All the information you need is already out there, you just have to search for it.
Thread
Thread Starter
Forum
Replies
Last Post
W O T
General Discussion
23
12-10-2005 05:16 PM
pa2play
Turbo Parts For Sale
2
10-02-2005 04:19 PM
digitalhav0c
Engine Management
5
08-17-2003 09:21 PM
