chip
 

Can anyone burn me a chip for a pr3 chip ecu(b16A) that will run 450cc injectors, turbo tables for up to 10psi? I have an ic socket soldered in my ecu but need a turbo program to run now. If anyone can do this how much would it be? I will be running a t3/t4 hybrid and will be intercooled.

Re: chip
 

who is going to tune it for you? i am sure they would be the best person to help you out

Re: chip
 

I will be tuning it myself. Basically I need a basic program to run the car under boost. I dont have the money to run an aftermarket system that is programmable.

Re: chip
 

If you have a chipped ecu, it's programmable.

Making a basemap is much easier than tuning a turbo car. If you can't make a basemap, you shouldn't try to tune your car.

Re: chip
 

Its not that I cant make a basemap , I dont have the eqipment to do it( burn it). Second of all I dont have the money to buy a programmable ecu and laptop. I just need a chip with a turbo program that will run 450cc injectors. I have one for 10 psi but its for 240cc injectors. I came to this forum because I figured Id have the most knowledge here. This is the last thing I need to get my turbo kit together.

Re: chip
 

In order to run a chip burned with a basemap, you need a chipped ecu (programmable).

Read more faqs, because you've missed something.

Re: chip
 

I have an ic socket soldered into my ecu that will allow me to remove and install different programmed chips if thats what you mean by programmable.

Re: chip
 

yes it's programmable then. You don't NEED a laptop, just a $50 burner, and some paper and pencil.

Re: chip
 

Well at this moment I just need a base program so I can get the car running. After that if I have issues I will adress them as I go (i.e. drivablity problems). I'm gonna be running 450cc injectors so I need something to make sure they have the right pulse width and the right timing curve as I boost.

Re: chip
 

If you make the program and email it to someone with a chip and a chip burner...I am sure there are many here that would help you out.

I myself would do it for $8 shipped...