HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   check out this cheapo ecu chip (https://www.homemadeturbo.com/engine-management-10/check-out-cheapo-ecu-chip-117023/)

laith 02-07-2010 01:49 AM

check out this cheapo ecu chip
 
just wondering if anybody else happen to see this. what you guys think? could it work for a cheap, low boost setup? if it even works... has anyone tried it?...

i know most of you might just say that its ------ retarded but... lol. to the ones that are a little more openned minded about it...

TURBO 88-91 HONDA CIVIC CRX DX/Si PM6 ECU CHIP D15/D16 : eBay Motors (item 350195257385 end time Feb-20-10 16:52:53 PST)

hard2obtain 02-07-2010 02:18 PM

gone

tecks 02-07-2010 10:02 PM

it doesnt do anything you need to tune the chip for your set up not just throw in some basemap. plus you need a chipped ecu to even use it. a waste of money forsure.

Durty-D 02-10-2010 07:24 AM

your best bet for a 88-91 crx, givin that is the car your tuning, would be a OBD1 conversion and a phearable.net ecu. its tunable on all kinds of different software like crome and neptune. that cheap ebay stuff just adds timing and fuel and generally ends up with a messy hole on the side of your motor.

turbof22a 02-13-2010 03:23 AM

or you can chip a pm6 for $20 and download turboedit for free and tune it your self with a willams chipburner. ---- going obd1

jakethesnake110 07-31-2010 10:36 PM


Originally Posted by turbof22a (Post 1298768)
or you can chip a pm6 for $20 and download turboedit for free and tune it your self with a willams chipburner. ---- going obd1

wat EXACTLY will i have to do and wat EXACTLY will i have to "have" in order to tune my obd0 ecu myself on turboedit? plz email me (jakethesnake110@yahoo.com)

EG- 10-09-2010 11:27 PM


Originally Posted by Durty-D (Post 1298622)
your best bet for a 88-91 crx, givin that is the car your tuning, would be a OBD1 conversion and a phearable.net ecu. its tunable on all kinds of different software like crome and neptune. that cheap ebay stuff just adds timing and fuel and generally ends up with a messy hole on the side of your motor.

Conversion Harness, Chipped p06, and an obd1 dizzy.

I can hook ya up.

Let me know.

Jared


All times are GMT -5. The time now is 11:50 AM.


© 2024 MH Sub I, LLC dba Internet Brands