Chris Harris

When you thought HMT couldnt get any cheaper.

There is a reason everyone uses them...just follow the herd.

Baahhahhahhahh

projekteg

was that a sheep

Chris Harris

I think...

Reddy

Dx 101

for all you guys that have the dsm. you got them used right? did any of you clean them, get them flow tested or anything like that? if so what kind of places and about how much did it cost?

W O T

I paid $100 to get mine flow tested and cleaned

Sikocivic

TunerToys sell brand new 440s for $199 and they are plug and play for Hondas.By the time you buy a set of used DSM ones and have them cleaned you have spent almost as much as these new ones cost. I know alot of people run used injecters with no problems but do you want to take that chance just to save $25 to $50?

HMT-Admin

The rx7 injectors fit pretty decently in the honda rails, just need to use a washer to space it up a tad. Like someone mentioned above, the NA 13b injectors flow 440ish.

ssl2k

---- that.

the guy that made this post is complaining over $50 bucks. $50 bucks ain't ----.

unless you're pushing 300whp you're not going to be close to maxing them... and you'll beable to tell when you go to get your car tuned and if you can listen if one of the injectors is fucked.

Bongnak

ive used rx7 inejectors on three different setups now and they run fine. They are 460cc's and are low inpedence. You do need a washer for the rail but thats risky to me so all you have to do is hook up the inj clipps on there and then bolt the rail on. the rubber grommet fits there snug so u still do wat you do with dsm's. just get them from any fc rx7, they are orange square tops. im running a set now using turboedit (with TE's 450 injector sizing option). U can find these on ebay for like 20 bucks.