cel 22.
is there any way to make it go away? can u jump the wires at the ecu? i am running a p28 with a b18c1 stock chip. im trying to get my car ready for the dyno. got a cel 22. i read it wrong the first time. made sure the pressure switch is good. how much oil pressure should i have going to the switch? is there anyway to bypass the switch without burning another chip?
|
Re: egr.....cel
get a chip burnt with the egr disabled?
|
Re: egr.....cel
there is no egr on a p28
egr is found on vx motors h22's f22's d16y5 |
Re: egr.....cel
Originally Posted by chris
there is no egr on a p28
egr is found on vx motors h22's f22's d16y5 You must be running a P13 or P14 ECU or some ----... |
Re: egr.....cel
isnt there egr in integra's? im using a p28 with a b18c1 stock base map. it in the codes for the civic and teg in the haynes manual.
|
Re: egr.....cel
theres an egr on my b16. im not sure if i have a sensor for it or not though.
|
Re: egr.....cel
Originally Posted by Souutherncivic
isnt there egr in integra's? im using a p28 with a b18c1 stock base map. it in the codes for the civic and teg in the haynes manual.
I know that on some of the automatic b18a1 there is a egr. |
Re: egr.....cel
i may have read the cel wrong. im gonna check it again today it might be cel 22. vtec pressure switch.
|
Re: egr.....cel
meant to say read the wrong code. not cel
|
Re: cel 22.
I had the same problem (CEL 22) and I just disabled the Vtec Pressure Switch in the ROM using eCtune. I think if you connect pins A4 and D6 this will do the same thing.
|
All times are GMT -5. The time now is 08:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands