Cars running TE/Uberdata/Crome SUCCESS STORIES!!!
 

If you car uses DIY Engine management and you would like to show it off, drop me an *email* admin@pgmfi.org (I ------- HATE PMs) with some info on your setup, dyno numbers, track numbers, race finishes, pictures, etc. If you feel your car is a "success" (I promise I won't judge you) then I want to hear about it.

Trying to compile an online list of who's using PGMFI-derived work and what results they are getting.

http://www.pgmfi.org/twiki/bin/view/Home/SuccessStories

(Parker, could you sticky this when you see it please?)

Re:Wanted: Cars running TE/Uberdata/Crome
 

how about i just post in here


:-D

i will start off with
213whp 229 torq

ok, so i didint have a basemap to go to the dyno, so i was like fuckkk1!!! I had jason's msn name so i messaged him, about a half hour later i knew how to make a basemap and everything so i was super excited (started off with .9 retard and 120% fuel. So we take it to the dyno, consistant 10.5 af all the way across. lean it out to 113 and BAM perfect 12:1 a/f so easy to tune, probably could have gotten a litte more hp by adding some timing but hey, it was awsome. I'm really really happy with TE.. I didint even have to touch the map, just change the % down, went from 120, 115, 114, 113 and bam, right there perfect, there is still more hp to be had with timing, and i can't wait to hit the dyno again with this 200k motor.

Thanks again everyone

-Josh



*EDIT*

NOW ALL WE NEED IS 1 WIRE VTEC!!!
and the turbo was 52/48 t3 fresh rebuild

Re:Cars running TE/Uberdata/Crome SUCCESS STORIES!!!
 

heres another ls dyno: a/f lil choppy but stayed under 12.5 and 11.0
220whp
191ft.tq at 9psi.
t3 48/60.
2.5 dp
next time going for 12psi when I put in that gm 3bar. 300 is the goal with this stock motor.

Re:Cars running TE/Uberdata/Crome SUCCESS STORIES!!!
 

well not such as success story but an indicator of what uberdata 3 bar bin can do. car was breaking up at 16psi and i let it off at 5500 rpms. it still made 251.9hp

at 12 psi i made 225.5 and 208 ftlbs or torque

Re:Cars running TE/Uberdata/Crome SUCCESS STORIES!!!
 

Finally got a chance to hit the dyno during our TurboEdit day.

I'll post a graph when I can get it scanned in...

The best part were my compression #'s before I put her up on the dyno.

190 100 190 210

Blow-by city!!! Major headgasket problem I believe.

I believe the #'s were:

251 WHP / 235 TQ @ 13psi

This is on NG48 code on a stock map sensor using a PR4 ECU.

Re:Cars running TE/Uberdata/Crome SUCCESS STORIES!!!
 

here's my 91 LS teg dyno #s
208whp 197 tq @8psi...boost cut just before i reach 9psi
t3/t4 .63 .60 57 trim..semi street tuned..(still learning) :)
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

Re:Cars running TE/Uberdata/Crome SUCCESS STORIES!!!
 

here is my setup using uberdata 1.70 UnTuned(basemap)


247whp
241tq

Stock b16 w/ 10lbs on t3
2.5" dp and exhaust

Re:Cars running TE/Uberdata/Crome SUCCESS STORIES!!!
 

I had 174,000 miles on my d16a6 when I installed my HMT kit and Ghettodyne (at the time) and then Turboedit. I now have 194,600 miles. So 20,000 miles is a pretty good success, but I'm swapping in a slightly fresh ZC because I overboosted the A6.

Re: Cars running TE/Uberdata/Crome SUCCESS STORIES!!!
 

had a ef9 sir civic . b16a1 engine with 120,000k's. previously ran 14.9 on dc2 wheels full interior non lsd.
turbod it using turboedit, pm7 ecu and a basemap

ran a 13.7 with this basemap on 175's. car has since done almost 10,000k's on boost with constant rape everyday. 6psi boost on 100% stock engine

TURBOEDIT = ;D

Re: Cars running TE/Uberdata/Crome SUCCESS STORIES!!!
 

Sup Everyone this is my fist post....

I am running uberdata with the new version of chrome...

My brother just got it last week and we starting tuning my car, from what i have seen it is alot more user friendly and alot more stable, the last version we had kept crashing and not connecting with my ecu.
The new one No Problems at all, i think it has a dyno (est of course) built into the system.. Lots of nice features. the only problem is that we could not get the system to match the wideband 02 Readings exactly the same. we were using an innovative wideband, and we switched the settings to innovative and it was all bad .
im loving the launch control and speed shift settings as well .
Now onto the car.

00 acura integra type R
stock motor except headstuds

Custom Full Function turbo kit
Turbonetics T3/T4 50 Trim Turbo
tial wastegate
greddy type S Blow Off Valve
3 inch FFTEC Downpipe
FFTEC Intercooler
denso 660 injectiors

Engine Mgmt is Uberdata

like i said we were running the car street tuned. Rich to be safe, we worked on it and finished last night
and the car is 1000 times better now. waiting to get some dyno time we are hoping for 250-270 im being conservitive

as far as quarter times, im thinking high 12's low 13's on slicks

this board seems pretty cool im assuming this is all the ht people .. if so im outkast_r on HT

Thanks Guys

Re: Cars running TE/Uberdata/Crome SUCCESS STORIES!!!
 

This is my first post on HMT. This site is great. I came from Uberdata forum. Anyway this is what I run.

Uberdata 1.8le
Ostrich

98 Civic EX Coupe converted to manual
Full Interior
Every tool I own in my trunk!
Stock B18C
Precision SC60 60mm comp wheel, 60 trim, 0.63 A/R
Inline Pro SS Mani
Rebhard DP
Tial WG - 5psi
750cc RC's
Stock exhaust

Street tuned at 11.5:1 on first few runs. Had to go to 150% just to get a little rich. I'm going to track next week. I estimate somewhere around 13.6 which is what my friend's stock Integra GSR w/revhard turbo kit (6psi) did. We raced even.

Re: Cars running TE/Uberdata/Crome SUCCESS STORIES!!!
 

Ok, here goes myne:

146 whp
164 164lb/foot

TurboEdit 2.5 / ng55
Lambdaboy JR

D16A9 / GT1749V turbo / 6psi

Developing work as it´s a basemap.

http://img141.echo.cx/img141/5051/mk11teste6psi6eb.jpg

Re: Cars running TE/Uberdata/Crome SUCCESS STORIES!!!
 

I havn't gotten to a dyno yet, but heres my setup

1994 Honda civic coupe

JDM D15B vtec
Ported 14B turbo
2.25" IC piping
FMIC
HKS ssqv
STR comp fuel rail/fpr
450cc injectors
Turbo XS MBC
2.5" exhaust unrestricted
projekteg Uberdata P28 w/datalogging

gutted interior, trunk, etc. cf hood, trunk, fiberglass front, rear, side skirts, and fenders. Dunno the weight now either, but it's alot lighter. I'll post when I find out.

Re: Cars running TE/Uberdata/Crome SUCCESS STORIES!!!
 

88 CRX HF
D16A6 TURBO

Setup
JDM S13 T25 .64/.80 TURBO
HF Manifold
Sidemount Intercooler
DSM BOV
Custom 2 1/2 Downpipe, 2 1/2 exhaust (no cat)

Turbo Edit and 450cc Injectors
178 WHP / 176 FT. TRQ @ 7 PSI

Re: Cars running TE/Uberdata/Crome SUCCESS STORIES!!!
 

my gsr turbo layed down 282 whp 249 tq on 9 psi using uber 1 bar

Re: Cars running TE/Uberdata/Crome SUCCESS STORIES!!!
 

Posted: Fri Oct 07, 2005 7:40 am Post subject: Dyno'd stock LS...(Church Automotive)NG55

--------------------------------------------------------------------------------

Shawn @ Church Automotive made some cleaning up on my boost maps tonight(NG55)...I will upload my bin as soon as copy it from my old pentium laptop(no cd burner :P)
base run @ 13.8 psi was 269whp 237tq...
final tuned with 13.8 psi was 279whp 250tq, he let the car cool off for five minutes and sprayed water at the intercooler and made the last and final run,which made 277whp 248tq...
http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg
[img]http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTA5MDQyNjZzNDEzZGZkMzF5NTQx.jpg
[/img]
Stock LS,garrett t3/t04e .63 .60 57 trim stage 3 wheel,love fab shorty,tial 38,cca 31x8x2.75 ic,dsm 450,e-cutout,motorola 2.5,walbro 255lph,xs mbc..

Re: Cars running TE/Uberdata/Crome SUCCESS STORIES!!!
 

hey my name is pete and im new to this form but i know HTM.com for a few years now and i ahve a turboed b16y8
and im running a sds eci and two stock civic injectors boosting 9psi ocacianally liek that i do 6 to be safae but anyway i was wondering wat is an "ostrich" cuz im trying to figure out all this DIY ecu tuning any tips would be greatly apriciated about how i can get started i have a stock p28ecu i belive and my car is a 95 ex andi got the 96 ex moter cuz the d16z6 blew long story... thanks peter

Re: Cars running TE/Uberdata/Crome SUCCESS STORIES!!!
 

Not the right thread for this...make a new thread.

Re: Cars running TE/Uberdata/Crome SUCCESS STORIES!!!
 

I'm running TE and loving it.
b16a
holset hy35w
2.5" dp 2.25" exhaust
starion IC
DSM 450cc

Street tuned made 268.8whp and 187ft/lbs and I haven't really messed with my igntion maps much.
I have great gas mileage too.

http://copperpenney.com/crxsite/tmp/dynoGraph.jpg

Re: Cars running TE/Uberdata/Crome SUCCESS STORIES!!!
 

my car:
d16y7, td04L, 450ccdsm, jrc fmic, uber 1.66
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

friend car:
ls/vtec, sc61, rc88cc, uber 1.70
http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg
i've since done some fine tuning to smooth out the dip in the upperend.

quite a few more inbetween these two...i'll have to dig up some of the dyno files.

Re: Cars running TE/Uberdata/Crome SUCCESS STORIES!!!
 

b16a built,t3/t4 60 trim turbo running 18psi gm bar map sensor, acceleration and idle smooth as a shaved -----. beating everything I raced so far. 2005 mustangx3, audi rs4x1 pontiac transamx2, bmw m3X1. volvo s80 rX1.. the only car to beat me so far is my friends 2005 si using same program with a bigger turbo at 14psi...I beat him on short races but he beat me on autobahn races... I love it though... dont have any dyno or quartermile... but beating all these cars is success for me.