-SKUM-

27SF512


Well after doing some more searching, people are saying i need to downgrade my firmware to 10.10.0 So i think im gona have to contact moates to get it because I cant find it.

BoostForLife

Here's crome 1.2

http://www.tunewithcrome.com/download/crome1.2.zip


Here's all other crome downloads they have
http://www.tunewithcrome.com/download/

Tom-Guy

Are you burning to 0x8000? You have to burn the last half of the 27SF512 when using it on a Honda ECU.

-SKUM-

yep, im burning at 8000.

But the problem isnt in the burn. Turbo edit 3.1.9 beta I think is ------- up the file when I save it.

But what im trying to figure out is how to conect turbo edit 2.6 and ostrich 2.0

I asked moetes for firmware 10.10.0 Hopfully the can get that to me and it will solve all my problems.

-SKUM-

thanks man

BoostForLife

you're welcome

Tom-Guy

Possible. Have you tried to download the .bin directly from the Ostrich with any of Mark Mansur's software? He has an Ostrich dumper somewhere on the Tunerpro site,
IIRC.

The only time I've ever used TE it was either v2.4 or v2.6, and I used my Ostrich v2.0 via TunerproRT. Give it a whirl.

-SKUM-

Well this is the email I sent moates,

So I have a turbo edit 2.6.1 and a ostrich 2.0 and it wont conect to turbo edit.
So one of my questions is that I cant set my baud rate to 920000 like it says to in your documentation. It has 4 settings.
9600
19200
38400
128000

Now I did try a new beta version of turbo edit 3.1.9 and it worked but it crashes.
Now I was told that I need to get firmware 10.10.0 but I cant find it on your site.


And this is what they wrote back:

If you can't set your baud rate to 925000 you will need a different version of TurboEdit that allows this setting. The Ostrich2 requires this.
Firmware: http://www.moates.net/documentation....entation_id=22 (I don't think that will fix your problem)
thanks,
-Dave Blundell



So it sounds like that I cant run turbo edit 2.6.1 and the ostrich 2.0
Well that ------- sucks

Tom-Guy

Download TunerPro, use it to control the Ostrich. You'll get to save the .bin in TE, open and upload with TunerPro, but it's still a LOT faster than burning chips.

Here's a TunerPro definition I came up with, it supports nothing except loading a .bin and flashing it to an Ostrich, literally did it on the side of the road in three minutes. Remove the .txt from the end of the file before usage.

-SKUM-

Well thanks for you help JD, im gona give it a shot here in a few weeks. He will be back in town than and I can maybe try some more tuning then. Bu im just kinda bumbed that I cant use my ostrich like it was ment to be used. O well. But all I realy need to tune now is his crazy idle. But I told him to come back when ALL OF THE PROBLEMS WERE FIXED......lol