Go Back  HomemadeTurbo - DIY Turbo Forum > Homemadeturbo > Engine Management
Cannot ID Chip with the Willem.... & other issues... >

Cannot ID Chip with the Willem.... & other issues...

Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

Cannot ID Chip with the Willem.... & other issues...

Old 06-22-2005, 09:28 PM
  #1  
0.5 BAR
Thread Starter
 
Join Date: Dec 2002
Posts: 164
Default Cannot ID Chip with the Willem.... & other issues...

Im trying to run the Willem burner with the SST27SF512 and I cannot ID the chip. Ive tried a # of different things to try and get it to work. I tired to DL an older version re0.97g cause I was trying to run re0.97ja. I though that might be the issue but it wont let me open cause Im running the newer version. And then other times it tells me that it doesnt have enough power. This only happends sometimes. I've had the program tell me that Ive read and burned a chip so I know that its getting the power I need (when it decides not to be gay). I also dont understand when to enter the hex 8000 thing @ th bottom when burning or only erasing or for both? The black jumpers are throwing me for a loop as well. When I try to burn or erase it tells me to relocate the jumper to w24xxx or something. Ive been working with this for about 5 hours now and Im starting to get a little frusterated with it. I know Ill get it eventually but its sure driving me up the wall right now. ANY help whatsoever would be great.

thanks... :P
BLaze is offline  
Old 06-22-2005, 09:34 PM
  #2  
1.5 BAR
 
Join Date: Dec 2002
Posts: 1,068
Default Re: Cannot ID Chip with the Willem.... & other issues...

It might help if you specify which willem burner you have.
PureCRXtasy is offline  
Old 06-22-2005, 09:59 PM
  #3  
0.5 BAR
Thread Starter
 
Join Date: Dec 2002
Posts: 164
Default Re: Cannot ID Chip with the Willem.... & other issues...

Sorry, Willem Dual Power....
BLaze is offline  
Old 06-22-2005, 10:00 PM
  #4  
3.0 BAR
 
Join Date: Jan 2005
Posts: 2,877
Default Re: Cannot ID Chip with the Willem.... & other issues...

my dual power willem wont Id my 29c's but it burns them just fine
Racintweek is offline  
Old 06-22-2005, 10:34 PM
  #5  
3.0 BAR
 
Join Date: Jul 2003
Posts: 6,449
Default Re: Cannot ID Chip with the Willem.... & other issues...

Chris Harris is offline  
Old 06-23-2005, 07:07 PM
  #6  
0.5 BAR
Thread Starter
 
Join Date: Dec 2002
Posts: 164
Default Re: Cannot ID Chip with the Willem.... & other issues...

Well this is what its telling me after I try to burn or erase.... Move jumper for erase W27Exxx & setting Vpp 12.75V.... I cant seem to burn or erase....
BLaze is offline  
Old 06-23-2005, 07:31 PM
  #7  
3.0 BAR
 
Join Date: Jul 2003
Posts: 6,449
Default Re: Cannot ID Chip with the Willem.... & other issues...

Originally Posted by Blaze
Well this is what its telling me after I try to burn or erase.... Move jumper for erase W27Exxx & setting Vpp 12.75V.... I cant seem to burn or erase....
Did you read that thread? Specifically where I posted the picture with how you are supposed to place the jumpers to BURN and then ERASE?

I made the pretty pictures so it would be easy to understand
Chris Harris is offline  
Old 06-28-2005, 05:11 PM
  #8  
0.5 BAR
Thread Starter
 
Join Date: Dec 2002
Posts: 164
Default Re: Cannot ID Chip with the Willem.... & other issues...

Ive about given up. I know that its so "easy" but I cant seem to get the right combonation to get anything to work. I cant erase the chip, no matter what I try. Ive tried switching the jumper on and off to get it to erase and I still click on blank check and it still tells me the chip isnt blank. Does the red LED need to be on when erasing? cause it doesnt come on unless I try to burn. Also is there any way that I could damage the chip by trying to erase it and burn it so many times and being unsuccessful? I know that Im not erasing it cause its got a PR4 map on it already and when I pop it into the ECU it goes richer then my basemap chip almost immeadiantly.... I just want to tune my car. Help...

BLaze is offline  
Old 06-28-2005, 10:19 PM
  #9  
0.5 BAR
Thread Starter
 
Join Date: Dec 2002
Posts: 164
Default Re: Cannot ID Chip with the Willem.... & other issues...

So.... I finally got it work... I was putting the chip in backwards... I was making it to complicated....

thanks for everyones help...

Blaze
BLaze is offline  
Old 06-29-2005, 07:39 AM
  #10  
1.5 BAR
 
Join Date: Aug 2004
Posts: 949
Default Re: Cannot ID Chip with the Willem.... & other issues...

Isn't it always something so simple?
95RedEX is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TunerToys
Turbo Parts For Sale
16
10-01-2007 12:20 PM
FooK
Engine Management
14
05-04-2005 12:03 AM
95RedEX
Engine Management
4
04-28-2005 12:10 PM
green91
Engine Management
1
08-23-2004 01:40 PM
alwaystootall
Turbo Parts For Sale
3
07-30-2004 07:12 PM


Thread Tools
Search this Thread
Quick Reply: Cannot ID Chip with the Willem.... & other issues...


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.