can i get by on my fuel system
#1
can i get by on my fuel system
i have a 99 integra ls that im putting a t3 , w equal length mani and 1st gen bov, around 7psi can i get by with my stock pump and injectors, i do have a adjustable fuel pressure regulator and aem high flow filter,,if i can get by what should i set my fuel pressure at
#2
Re:can i get by on my fuel system
an adjustable fpr is not a way to manage a turbo system.
at minimum you will need an fmu.
read here: https://www.homemadeturbo.com/forum/...threadid=28135
at minimum you will need an fmu.
read here: https://www.homemadeturbo.com/forum/...threadid=28135
#3
Re:can i get by on my fuel system
u can run it fine if u stay out of the gas and dont boost. otherwise, ull kill the motor pretty quick. Back down the timing all the way, run 94 octane, and dont floor it. its pretty much pointless if u ask me
no fuel managment, no boost
no fuel managment, no boost
#5
Re:can i get by on my fuel system
Originally Posted by crxdan
u can run it fine if u stay out of the gas and dont boost. otherwise, ull kill the motor pretty quick.
ya, just install everything and dont connect the wastegate arm. that way the flapper will not be held closed and then no boost.
#7
Re:can i get by on my fuel system
if you're looking for a cheap temporary solution until you can get into some decent fuel management, why not look into a cheap set of dsm injectors and either have a board member work over and obd1 ecu with uberdata and an obd1 conversion harness, or you could go with the AFC hack.
I would think that the afc hack would be better than an ECU. And afc + injectors you could probably do for like $250 or less, if you go used on the AFC.
I would think that the afc hack would be better than an ECU. And afc + injectors you could probably do for like $250 or less, if you go used on the AFC.
#8
Re:can i get by on my fuel system
i want to get by without doing damage on my engine- to do the ecu i need a obd1 for an auto teg ls-which im not having luck finding--is there a piggyback i could use with my stock obd2 ecu
#9
Re:can i get by on my fuel system
Originally Posted by ls_101
i want to get by without doing damage on my engine- to do the ecu i need a obd1 for an auto teg ls-which im not having luck finding--is there a piggyback i could use with my stock obd2 ecu