Bugfix ROM: Tester needed (Testers _still_ needed)
 

I think I figured out why some users were experiencing a boost cut with TE Try11/Try12 and NG26. There was a bug in the boostcut routine causing it to trigger randomly.

http://pgmfi.org/phorum/read.php?f=12&i=3620&t=3620

The fix is posted there. I don't have a running car to test in right now, so hopefully someone else who is experiencing the problem with high boost can post and let us know if the fix worked. I also incorporated the SOFTWARE changes needed for basic 1wire vtec support from the work by Tatou100 and cfavreau. Again, I have no car to test this so lemme know.

peace out.
-Dave

Re:Bugfix ROM: Tester needed
 

Works!

You are the man!

I updated my site...

Re:Bugfix ROM: Tester needed
 

Updated http://www.TurboEDIT.org ....

Re:Bugfix ROM: Tester needed
 

I love you guys. :'( *Tear's of Joy*

Re:Bugfix ROM: Tester needed
 

WooooooooT WOOOOOOOOOOOOOOOT ;D

Re:Bugfix ROM: Tester needed (Tests Passed!)
 

I retract my previous statement...still getting boost cut, just a tad bit higher than before :'( *tears of sadness*

Re:Bugfix ROM: Tester needed (Testers _still_ needed)
 

I just tryed out the ng26 code and got a boost cut at around 10psi, then tried the ng28 and I am still getting the same thing. Old ng5 code runs fine. If I keep the boost below 10 it runs good. Not complaining just wanted to give some feedback.

Re:Bugfix ROM: Tester needed (Testers _still_ needed)
 

Yeah...it's a perplexing dilemna...

It's not an actual problem with the boost cut code...its appearing somewhere else in the code.

Thinking about it....has anyone verified that the REV LIMITER is working in NG26/28???

I have mine set at 6900 but I never see it limit my RPMs...might this have anything to do with it?

Re:Bugfix ROM: Tester needed (Testers _still_ needed)
 

I am running pm7ng26 and I have a rev limiter. I forgot to change it from 6500 or whatever it is on the pm7 to 7600. I hit it and was like ah ----, I broke it again. So there is a rev limiter.

-Nick

Re:Bugfix ROM: Tester needed (Testers _still_ needed)
 

NG29... someoen please test for boost cut, and I guess rev limit(?). Please report back...

http://www.pgmfi.org/phorum/download...2,510/NG29.BIN

Re:Bugfix ROM: Tester needed (Testers _still_ needed)
 

oehhh new rom
Can't test it right now....blew my engine :( NA...

Re:Bugfix ROM: Tester needed (Testers _still_ needed)
 

Sem, that sucks :(

If no one can before then...I will test on Sunday and report back.

Re:Bugfix ROM: Tester needed (Testers _still_ needed)
 

Just tested ng29. Sorry guys, no dice. :( Still getting 9-10psi boost cut, didn't test out the rev limit though.

Re:Bugfix ROM: Tester needed (Testers _still_ needed)
 

http://smileys.smileycentral.com/cat/35.gif






http://smileys.smileycentral.com/cat/10/10_1_114.gif

Re:Bugfix ROM: Tester needed (Testers _still_ needed)
 

What the ----?

Re:Bugfix ROM: Tester needed (Testers _still_ needed)
 

BWHAHAHAHAH!

I'm going to have to agree with Sinister on this one..

Chris, WTF?! :P

Re:Bugfix ROM: Tester needed (Testers _still_ needed)
 

http://smileys.smileycentral.com/cat/23.gif





http://smileys.smileycentral.com/cat/15_1_106.gif





http://smileys.smileycentral.com/cat/59.gif

Re:Bugfix ROM: Tester needed (Testers _still_ needed)
 

LMAO you guys are funny.
Yeah it sucked that my engine blew NA...not even boosted :'( .
Oh well I'll be swapping the engine putting in a D15 I guess for the mean time, or till I blow it and get another ZC ready.

Re:Bugfix ROM: Tester needed (Testers _still_ needed)
 

Your engine blew? ..ring lands? ..rods? ..what?

Re:Bugfix ROM: Tester needed (Testers _still_ needed)
 

Tested in both a PM6 and PR4 today...still getting boost cut :(

Re:Bugfix ROM: Tester needed (Testers _still_ needed)
 

Hole in the block...The week before I lost a lot of oil...had a leaking oilpan gasket lost almost all my oil and after that it went badn I could hear the bearing. :(
On the highway the noise began to get worse.....It just took one minute after the noise began to really sound like a bad bearing and then boomm :o...smoke everywhere and a few miles of oil trails.