BSFC for boosted Hondas.
10-15-2007, 01:40 PM
#1
0.0 BAR
Thread Starter
Join Date: Oct 2005
Posts: 0
BSFC for boosted Hondas.
Anyone have a good idea of what the typical BSFC for a turbo Honda is? It would be pretty helpful info to go along with the turbo calculator that has been posted upo.
I know that many NA Hondas run from .42-.45.
I thin my current setup is around .42 last time I tried to calculate it.
I know that many NA Hondas run from .42-.45.
I thin my current setup is around .42 last time I tried to calculate it.
10-15-2007, 08:46 PM
#3
0.0 BAR
Thread Starter
Join Date: Oct 2005
Posts: 0
Re: BSFC for boosted Hondas.
Originally Posted by Walter
45? 
Engine @ 1,000 @ Peak @ Peak
Type RPM Torque Hp
4-stroke (low compression, carburetor) 0.62 0.47 0.52
4-stroke (high compression, carburetor) 0.60 0.42 0.47
4-stroke (high compression, closed loop) 0.52 0.35 0.42
4-stroke (supercharged, carburetor) 0.75 0.50 0.55
4-stroke (turbocharged, closed loop) 0.57 0.45 0.50
2-stroke (low compression, carburetor) 0.85 0.55 0.60
2-stroke (high compression, carburetor) 0.80 0.50 0.55
Diesel 4-stroke 0.35 0.25 0.30
Diesel 2-stroke 0.40 0.29 0.34
Type RPM Torque Hp
4-stroke (low compression, carburetor) 0.62 0.47 0.52
4-stroke (high compression, carburetor) 0.60 0.42 0.47
4-stroke (high compression, closed loop) 0.52 0.35 0.42
4-stroke (supercharged, carburetor) 0.75 0.50 0.55
4-stroke (turbocharged, closed loop) 0.57 0.45 0.50
2-stroke (low compression, carburetor) 0.85 0.55 0.60
2-stroke (high compression, carburetor) 0.80 0.50 0.55
Diesel 4-stroke 0.35 0.25 0.30
Diesel 2-stroke 0.40 0.29 0.34
In case anyone else is curious.
10-27-2007, 04:07 PM
#7
0.0 BAR
Thread Starter
Join Date: Oct 2005
Posts: 0
Re: BSFC for boosted Hondas.
Originally Posted by blundar
I was coming up with .38-.43 when I worked backwards, i.e. cars I had done with known engine parameters and turbo in order to get stuff to line up well
I was trying to use a turbo calculator that was posted here, and the numbers just weren't adding up. I was using approximate numbers for setup that I have seen, and the preduipwer numbers wet coming out right.
Thread
Thread Starter
Forum
Replies
Last Post
robs99si
Engine Management
4
05-06-2003 12:09 PM
rickys2000si
General Discussion
22
02-27-2003 02:00 AM
