Boost w/ Ghettodyne & ZC
05-09-2003, 11:09 AM
#11
3.0 BAR
Join Date: Feb 2003
Posts: 9,089
Re:Boost w/ Ghettodyne & ZC
ok ok ok... wait a second. Personally i have never looked into a ghettodyne. But I have a question. If the chip is programmed to ignore the MAP sensor then how does the chip know what fuel curves to use? What is telling the chip what boost levels are
05-11-2003, 04:35 PM
#14
0.0 BAR
Join Date: May 2003
Posts: 5
Re:Boost w/ Ghettodyne & ZC
so just so im clear u got a pm6 with the george hack and 450 cc injectors for engine management and notin else?? does it retard the timing and kill the cell or does it also increaase fuel pressures with boost? Do u still have to run ressistors on the injectors with the george hack bin?
would help if yould clear things up, thanks man
would help if yould clear things up, thanks man
05-11-2003, 09:33 PM
#15
0.0 BAR
Join Date: Feb 2003
Posts: 0
Re:Boost w/ Ghettodyne & ZC
If you have a car running a PM6 ECU now, all you need are 450cc injectors, the chip being talked about, AND SOME WAY OF TUNING IT. I suggest either an AFC or a chip burner, an edition of Ghettodyne will be out soon supporting it from what little elves tell me so a chip burner would not only be cheaper, it might be a lot better.
If you don't have a car running a PM6 ECU, you need to ask yourself what a car with a PM6 has that yours doesn't, and that answers all your other Q's.
If you don't have a car running a PM6 ECU, you need to ask yourself what a car with a PM6 has that yours doesn't, and that answers all your other Q's.
05-11-2003, 10:15 PM
#16
0.0 BAR
Join Date: May 2003
Posts: 5
Re:Boost w/ Ghettodyne & ZC
well the car im running is a 91 rex si with a pm6 the only real question i got is does this file support just my timing/spark needs or does it also increase my fuel pressure as the map reads higer boost. I just basicly just want to know if u guies are running fmu's etc. or not? Sorry if this is a stupid quesion im new to hondas
05-11-2003, 10:29 PM
#17
0.0 BAR
Join Date: Feb 2003
Posts: 0
Re:Boost w/ Ghettodyne & ZC
Originally Posted by whaaat
well the car im running is a 91 rex si with a pm6 the only real question i got is does this file support just my timing/spark needs or does it also increase my fuel pressure as the map reads higer boost. I just basicly just want to know if u guies are running fmu's etc. or not? Sorry if this is a stupid quesion im new to hondas
