HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Engine Management (https://www.homemadeturbo.com/engine-management-10/)

- - Boost Cut ? (https://www.homemadeturbo.com/engine-management-10/boost-cut-26197/)

Sikocivic

Sep 9, 2004 06:58 PM

Boost Cut ?

I am running PM6 ECU with TurboEdit NG48 on my turbo ZC. I am having a problem when I hit 8-10lbs of boost. It's just like you turned off the key. It loses all power and then it hits again and if you leave your foot in it it falls flat again. Is this "boost cut"? Can I run a different version of TurboEdit or is there some other problem? Up until this "boost cut " hits the car pulls very hard and runs great.

TurboEF9

Sep 9, 2004 09:07 PM

Re:Boost Cut ?

Hrm, interesting... from what I have heard, there have been no reports of a "Boost cut" with the NG48 code.

Chris Harris

Sep 9, 2004 09:14 PM

Re:Boost Cut ?

Quote:

Originally Posted by TurboEF9

Hrm, interesting... from what I have heard, there have been no reports of a "Boost cut" with the NG48 code.

I think there are if you IMPORT maps with NG2x column headings or something...

I have no cut and I am running 12psi

Semnos

Sep 9, 2004 10:14 PM

Re:Boost Cut ?

if you just copy paste the tables then???

Chris Harris

Sep 9, 2004 10:43 PM

Re:Boost Cut ?

Quote:

Originally Posted by Semnos

if you just copy paste the tables then???

Shouldnt have a problem using copy/paste

Sikocivic

Sep 10, 2004 09:51 PM

Re:Boost Cut ?

Quote:

Originally Posted by xenocron

Quote:

Originally Posted by Semnos

if you just copy paste the tables then???

Shouldnt have a problem using copy/paste

Thanks, I will give that a try.

Sikocivic

Sep 13, 2004 03:30 PM

Re:Boost Cut ?

Got it fixed. It was so rich in boost that it was just falling flat on its face. ::) I took out some fuel and now the problem is gone.

All times are GMT -5. The time now is 05:23 AM.