HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Engine Management (https://www.homemadeturbo.com/engine-management-10/)

- - .bin's (https://www.homemadeturbo.com/engine-management-10/bins-27207/)

lets see some bin's for turboedit and uberdata hell even chrome. give your bin and your setup. give it up suckas! i hear from another post eveyone is willing to give up their bin's and dont care, so i dont wanna hear any bitching about how i should go ---- myself and make my own! lets see!!!

Quote:

Originally Posted by mycrx

go ---- YO-self and make YO-own!

Where can I upload?
It isnt' WBO2 tuned yet, but it runs great on a D15B2 with mpfi swap

why make my own when the last post everyone was saying, everyone is willing to just give out their bin's.

if you want my .bin, just follow the instructions on the UD website on how to create a basemap ;)

i seen it in a post a guy made in the forced induction forum, he had 200+ whp on a t25 and people were bitching at him for not putting up his map. that is why this was made.

I should have charged people to use my bin... I would be rich!!! :D :P

BBKA's .bin has gone Platinum!!!

you shoulda charged pat! but then everyone might be bitching at you like they were the dude that wouldnt give up his bin. and only charged people for it.

i gotta see this post...

Quote:

Originally Posted by mycrx

https://www.homemadeturbo.com/forum/...threadid=27954

Wow I just read through that whole thread. I would have posted in there, but the thread was already locked. That presh dude and cray are ------- gay lovers alright. ;) Oh and Presh why the ---- are you running c16 in a stock d-series only making 200whp? I see absolutely no reason to run race gas with that much octane on your setup, it's just not necessary. Your afraid to make a few dyno runs on 94 octane? lmao... that is funny.

On and since were on the topic of people helping and giving out bins... DAVE (leed) IS THE MAN! I tried giving him money for making my bin and helping me out with tuning my car, but he wouldn't accept it. Now that is a good guy right there... big thumbs up!

Oh and here is a quote from that presh homo in that other thread... "Does that mean I should install DSM 450's for free also, because I learned how to do it from HMT? Once again, I charge for my TIME." Jeff (Abaz) actually installed my resistor box and injectors for me, I basically just helped a little bit and learned a lot. How much did he charge for his time? Nothing... Now that is helping people.

If I ever get good enough to tune other peoples cars I would do it for free because I like all that tuning ----, it's fun! I would also help any of my friends out with building/installing a turbo kit (anything car related) if they needed help, free of course. I actually just met a guy in my town and I am helping him out right now getting his car setup with uberdata. I can't really tune that well, but I can throw my wideband on his car and use my bin and get it running decent enough (better than his greddy blue box, no ignition retard, DSM 450cc injectors, and low fuel pressure setup). It will defintely be safer and I will just leave the fine tuning to somebody else.

HMT and uberdata are all about helping people, not making money.

Eh...that was the gayest thread evar!

I won't comment as I dont want this thread to turn into the same crap that was.

i'd tell you guys my opinion, but you'd have to pay me first :-X

Quote:

Originally Posted by mycrx

I think you should look into setting up a 'BIN depository'

Buy the hosting yourself and create a place where BINs are easily deposited and can clearly be organized into code generations and ECU/engine specfic combinations and features.

Make that your 'contribution to DIY ECU tuning'

I'll be happy to post some BINs once that is setup...cool?

Hell I'll do it...and charge a $1 per BIN DL...hrm, now thats another money-maker.

Nevermind everything I just said, I may have to do this myself :P

it sounds to me like he's just trying to stir some ---- up after the last thread got heated and i locked it up.

Chris.. I'll throw a quick and dirty PHP script together for you if you want, and give you access to it on the TurboEDIT.org site. I'll have it mod the map library on there.

I'll try to get to it this weekend..

ya im always needing help with turboedit bin's and need some to burn to try and get my ---- running right, but everyone is always being gay and telling me do it myself. so i firuged i'd make this thread and see where i got.

I said i would share, but I need to upload it somewhere

Quote:

Originally Posted by Semnos

I said i would share, but I need to upload it somewhere

email it to me i'll host it

willahlborn@aol.com

You're thread has inspired me. I've PMd a few people and soon you shall see an easy ul/dl area for BIN files.

Check back shortly...

anyone have any bins for TE

Here is my bin.

Thanks Will

http://www.media-mizer.com/semnos/D15boost.bin

It's also on xenocron's site.
Use at your own risk :P
Not fully WBo2 tuned yet...is used on a D15B2...A6 head and intake T3/T4E 57 trim compressor wheel A/R .50 compressor if I'm not mistaken...and .36 turbine

any uber bins for an LS

Welp...I put up a little site...a few have posted. When I get some more time I'll start throwing some basemaps up there as well.

http://www.-------------/bins

that websight should be alot of help one there is people posting some good maps.

Quote:

Originally Posted by mycrx

that websight should be alot of help one there is people posting some good maps.

let's hope

Thanks for the page Xenocron that will be priceless when I get my turbo setup in.

Damn bitches! Post your bins! It will benefit everyone. Easy to point a noob there.