.bin file for ZC with T3/4
I sold a guy a chip for PM6 but he's using a ZC and he said it ran terrible (ran a 17.1 in the 1/4 mile). Someone get up with me with one that will handle this setup good... I thought the d16a6 and ZC would run alike, but guess not.
Thanks. I probably should post this in the pgmfi forum. |
Re:.bin file for ZC with T3/4
D16A6 == SOHC, Most ZCs are DOHC..
The problem was the multipliers were probably wrong, thus, the same fuel values weren't applying the same amount of fuel. |
Re:.bin file for ZC with T3/4
not to thread jack but um Mr Dr Pep are you thinking what I am thinking also since mine is a dohc zc too?
|
Re:.bin file for ZC with T3/4
yes I am...
|
Re:.bin file for ZC with T3/4
which reminds me... since I had planned on sending you another chip anyway, I'll get you the right one next time... I'll do it for free, just please send me back your other chip when you get mine...
Now, about that ZC .bin file... is there one floating about in the shadows out there? |
Re:.bin file for ZC with T3/4
zc bin yea lemme look around I think there is one on the pgmfi board. but its not a boost bin just a regular zc bin. lemme go look now I just got off work.
|
Re:.bin file for ZC with T3/4
http://www.pgmfi.org/phorum/rom_brow...=OBD0%2FPM7%2F
pick one i dont know exactly what one ya need or maybe a pg7 for a teg would work might be alittle rich... I have no problem sending yers back when i get the other :)) |
Re:.bin file for ZC with T3/4
ok the onlyway I could open the bins was with obd0 edit unless we copy over the tables and add the new one I am at a loss to know what to do (i dont know much abut this) I will make a bin in ghd 2.2 with the maos from obd0edit maybe that will be a start shoot i dont know how to recurve it for 450cc injectors. or is that just under fuel pulse?
|
Re:.bin file for ZC with T3/4
Take a Ghettodyne 2.2 boost bin and paste LS fuel maps into it. The ZC ignition is much more aggressive than D16A6, it is almost identical to LS. I'd recommend just cutting and pasting LS_MAPhack_1.0.bin's fuel and ignition tables from the PGMFI/Approaches/MAPhack forum.
My friend's 15G Greddy kit ZC in 91 Civic Si, weighed down with speaker boxes and such nonsense was running the LS MAPhack, pulling LS1's lightly @ 8 psi. |
Re:.bin file for ZC with T3/4
good idea with the ls... I had no idea how similar they were
btw, where can I find the LS map hack .bin ? Thanks man.. So I should paste in the fuel AND ignition tables over? |
Re:.bin file for ZC with T3/4
I was wondering that too. btw Pep I may have to that bov from ya too... maybe we can add a How Shadow can learn this stuff tutorial too lol :)....
|
Re:.bin file for ZC with T3/4
Pep pgmfi is down or i would get it for you when it comes back look in
PGMFI/Approaches/MAPhack forum. |
Re:.bin file for ZC with T3/4
yeah... btw, I still got the bov
|
Re:.bin file for ZC with T3/4
http://www.pgmfi.org/phorum/read.php?f=35&i=1&t=1 thats where i found it.. in obd0edit the fuel maps look close maybe a little rich but close.
|
Re:.bin file for ZC with T3/4
hold on... wait a sec... is the LS_MAPhack_1[1].0_retard_baseline.bin the file for use... grrr.. I've been SO busy I can't even think right now... I'll get back to it in tuesday.
\ Grrr |
Re:.bin file for ZC with T3/4
thats ok cause i am lost lol going back to the other site to get lost even more lol
|
Re:.bin file for ZC with T3/4
wait isnt that close to the one that you made for boostedB?
man id love to see yer bins hehe ;D |
Re:.bin file for ZC with T3/4
JD if you have some time could you give more insight and a small fast help.... do I/we have the correct bins. and from what point to what point in the fuel map..
Also should we merge the ignition maps also if so from what hg/rpm to what hg/rpm Please JD I'll give ya a cookie :P |
Re:.bin file for ZC with T3/4
The GhD 2.2 LS tunes are labelled "4blundy 10%.bin" and "4blundy rich.bin" and probably floating about the internet right now.
Putting the LS MAPhack fuel/ignition (meant for use with AFC hack or other MAP sensor hacks) maps into a GhD 2.2 boost bin should result in a nice turbo ZC basemap. MAPhacks don't work without AFC or similar hardware hack, but the scaling of the maps is very similar to the Georgehack aka GhD 2.2 boost. And you're welcome to my .bin library... it's a huge clusterfuck of disorganized ---- I cannot keep track of. Tell you what, I'll throw it up on Kazaa tonight in a file called homemadeturbo.zip, you can muddle through. |
Re:.bin file for ZC with T3/4
ok couldn find your zip on kazaa i looked all night :(
And I think i get it now. use the fuel and timing from the bin and go from 26hg-1.3 on timing and fuel and leave the rest after 1.3 alone for the boost :-\ |
Re:.bin file for ZC with T3/4
ShadowRex... I'm at school right now in Nashville Tenn.... I'm very busy so when you get all that mess together, let me know. I will try to get back to you asap. I have all my burner and chips here to I can still get that out to you. I haven't been on HMT forums in a while, but I'll keep in touch.
|
All times are GMT -5. The time now is 10:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands