ATTN: LC-1 OWNERS
 

i would like to know what you think of your lc-1, and any set-up tips. i'm probably going to order one this week, so i'd like to hear what you have to say. thanks

Re: ATTN: LC-1 OWNERS
 

Only use mine on a few runs now. At first I thought it was shot, but I just didnt ground it well.

So far I have no complaints. Running it back into the ECU and Datalogging Via CromePro. Haven't used LogWorks yet.

Re: ATTN: LC-1 OWNERS
 

i've been running mine for 1500 miles and havne't had any problems with it, I did have a problem about a week ago (code 8) all i did was put a heat sink in and it fixed the problem. I got code 8 after wrapping my downpipe in thermal wrap so i think it was just heating the sensor up to much.

Re: ATTN: LC-1 OWNERS
 

with the datalogging, what can i do if i don't have crome pro? freelog or ECUcontrol?
or can i still tune the "old fashon way" with a co-pilot doing the logging? i'm on a strict budget, and a deadline. my buddy bet me $100 that i won't have the car running with boost by july 4th. ;D

Re: ATTN: LC-1 OWNERS
 

ECUControl Can handle it too.

Re: ATTN: LC-1 OWNERS
 

I'm currently using Freelog. Just go in under the wideband tab and enter you min and max voltage an A/F values.

Here's my setup.
https://www.homemadeturbo.com/forum/...?topic=63636.0

Re: ATTN: LC-1 OWNERS
 

thanks for all the info. i was hoping to order it soon, but now i heard they're all on back-order cause of some bugs. :P we'll see

Re: ATTN: LC-1 OWNERS
 

Im using the lc-1 on my daily driver using the output to replace the narrowband. Its a great little unit but make sure you follow the wiring (mostly ground) instructions to a tee.