Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

AR's getting lean at 7psi?

Thread Tools
 
Search this Thread
 
Old 04-11-2006, 12:26 AM
  #1  
0.5 BAR
Thread Starter
 
stevecivic's Avatar
 
Join Date: Jan 2003
Posts: 152
Default AR's getting lean at 7psi?

The car idles at 14.6/7 AR and when boost starts it goes to 12-12.5 but as boost increases it continues to get leaner until 14.3/4. I have had boost up to 8 or 9psi and it does the same thing. Is this to lean under boost? I do not have a burner so i will need to find somone to tune my car.

Setup D16z6
dsm 450cc stock fuel pump and pressure
T3 .60 .63 with 3" exaust and DP
I have a PLX M300
uberdata with Beerbongkicksass bin
stevecivic is offline  
Old 04-11-2006, 02:40 AM
  #2  
3.0 BAR
 
leed's Avatar
 
Join Date: Dec 2002
Posts: 3,830
Default Re: AR's getting lean at 7psi?

You could just open your bin in Uber and add about 8-10% for every A/F point you wanna move in each respective boost column. Its that easy.

leed is offline  
Old 04-11-2006, 02:56 AM
  #3  
0.0 BAR
 
Guy-Fast's Avatar
 
Join Date: Dec 2002
Posts: 0
Default Re: AR's getting lean at 7psi?

ya those settings are way lean for an all motor build and the danger zone"top gun" for boostage. Gte them in the high 11's and enjoy a car that doesnt **** out rods and cough headgaskets.
Guy-Fast is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TheMadScientist
General Discussion
16
12-04-2008 01:43 AM
HMTdmc
Engine Management
2
06-03-2007 08:15 PM
Turblow
Engine Management
31
07-10-2006 10:42 PM
Turblow
Forced Induction
2
07-05-2006 08:57 PM
Sinner
Forced Induction
12
06-14-2003 07:17 PM



Quick Reply: AR's getting lean at 7psi?



All times are GMT -5. The time now is 01:56 PM.