anyone tune crome w/antilag?
#12
Re: anyone tune crome w/antilag?
#17
Re: anyone tune crome w/antilag?
Originally Posted by projekteg
there is a version that works but it hasn't been released yet. cuts ign. and adds extra fuel.
update.
tried the ign cut script with Crome Free 1.1.8r2, Basic Boost Tools +, with a launch limiter set at 4500, 50rpm rev resume, and it seemed to work, you could hear some popping action in the open DP.
However I ran into a problem, as we were doing some WOT pulls to dial in AFR's, the car cut out on me at almost 6000rpm, like a rev limiter. Looked to see the full throttle shift at 5800rpm, so I pushed that up to like 9000rpm for the moment to get it out of the way, and that didn't cure it. The next WOT pull I did with the car it stuttered around 5000rpm, then cleared out and did the same at 6000rpm and cleared out again. AFR's at the time were about 11.5:1-11.7:1 throughout the rev's.
Its intermittent though, did another pull a moment later and it ripped right up thru all rev's. I have one other idea on what might have been going on but im holding my tongue on that one for now until I am sure, cause it'll just make me look like a retard.
I am not sure if its related to the ign cut script, but I went ahead and burnt a new map with the same values and no ignition cut script, and I'll have the customer get back to me on if it quit doing it or not. I couldn't keep tuning the vehicle to find out, seems 3 of the turbo-to-manifold bolts didnt like their homes.
I'll keep everyone posted on whether or not the ign script was the cause...
Thread
Thread Starter
Forum
Replies
Last Post
operationcougar
Turbo Parts For Sale
3
02-28-2015 03:26 PM