anyone here using HULOG from moates
 

--------------------------------------------------------------------------------
I recently purchased the HULOG ( cable that connects the ecu to a usb port) and can't seem to get uberdata to datalog with it.

I installed using the moates provided drivers , then turn on the car, then open uber, click datalog tab, select the com4 that the usb is on and select my plx wideband, and click the o2, rpm, map options but just get flat lines.

Re: anyone here using HULOG from moates
 

Make sure port speeds and bits and such are set up correctly. There's a nice write up on it on uberdata.pgmfi.org