Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

Analogue output from WB O2

Old 03-18-2006, 11:42 AM
  #1  
1.0 BAR
Thread Starter
 
Join Date: Apr 2005
Posts: 375
Default Analogue output from WB O2

Ok so most of the WB o2 kits output an analogue signal for your ECU right ?

My question is this analogue signal going to be in the 0-1 Volt range or the 0-5 volt range.

I see the Zoltric unit output a 0-5 volt signal.
But most the cars here use a narrow band sensor so the ECM is going to be expecting a 0-1 volt analogue signal

Which WB O2s put out a Narrow Band Analogue signal and which do the wide ?
chinoy is offline  
Old 03-18-2006, 07:56 PM
  #2  
0.5 BAR
 
Join Date: Dec 2004
Posts: 114
Default Re: Analogue output from WB O2

Most of the popular WB setups will emulate the stock narrowband output for your ECU.

LM
PLX
Zeitronix

Chris
crxrocks is offline  
Old 03-18-2006, 11:21 PM
  #3  
3.0 BAR
 
Join Date: Sep 2003
Posts: 5,470
Default Re: Analogue output from WB O2

dont forget about tech edge.
kain is offline  
Old 03-19-2006, 12:04 PM
  #4  
1.0 BAR
Thread Starter
 
Join Date: Apr 2005
Posts: 375
Default Re: Analogue output from WB O2

Originally Posted by crxrocks
Most of the popular WB setups will emulate the stock narrowband output for your ECU.

LM
PLX
Zeitronix

Chris
On the LM its clear on the PLX its clear but on the Zeitronix see this chart
It dosent look like a 1 VOlt signal. Ive mailed them asking for clarification waiting for a reply.





chinoy is offline  
Old 03-19-2006, 12:27 PM
  #5  
0.5 BAR
 
Join Date: Jan 2006
Posts: 95
Default Re: Analogue output from WB O2

Originally Posted by chinoy
On the LM its clear on the PLX its clear but on the Zeitronix see this chart
It dosent look like a 1 VOlt signal. Ive mailed them asking for clarification waiting for a reply.





Most of them are customized using your laptop or the programmer that is included.
mechsoldier is offline  
Old 03-19-2006, 09:02 PM
  #6  
0.0 BAR
 
Join Date: Feb 2003
Posts: 0
Default Re: Analogue output from WB O2

I dunno if Zeitronix supports "narrowband output" aka 0-1 volt output.

Only some of the widebands have a user-configurable 0-5 volt output. I know neither PLX or TechEdge does. I'm going to guess and say Zeitronix doesn't have this feature either, or else support for their output wouldn;t be such a big issue with UD/Crome/etc.

Tom-Guy is offline  
Old 03-20-2006, 03:41 AM
  #7  
1.0 BAR
Thread Starter
 
Join Date: Apr 2005
Posts: 375
Default Re: Analogue output from WB O2

Well I got a responce to my question.
They are implementing it right now.

So it would seem they dont have it but will have it pretty soon.

This complete circuss of picking the right WB at the right price is such a pain in the **** it would seem better and faster to just have built my own unit.

At least I learned one thing as to why our early attempts failed. We where walking arround with a half dead Bike bat. And the heater on the WB never really got it up.
You need a good 12 Volts with at least 3-4 amps to get it to run right.
chinoy is offline  
Old 03-20-2006, 11:54 AM
  #8  
0.5 BAR
 
Join Date: Jan 2006
Posts: 95
Default Re: Analogue output from WB O2

Just get an LC-1 it's the cheapest and has the most features. I was trying to make a diy one back in the day too but it just ended up being a pita, it was almost as expensive too but that's because it was one of the setups with the sensor from Hondas. Anyways, I got mine for $150 with a sensor on ebay, and for that cheap, me soldering some DIY thing together isn't even worth my time.
mechsoldier is offline  
Old 03-20-2006, 12:48 PM
  #9  
3.0 BAR
 
Join Date: Sep 2003
Posts: 3,751
Default Re: Analogue output from WB O2

I used my DIY setup for 2 years. Never a PITA. Wasn't near as expnsive. I had about 40.00 invested in. I have a LC-1 now, just because I'm tuning alot of customers cars and wanted something eally compact.
bumblezc is offline  
Old 03-20-2006, 11:02 PM
  #10  
1.0 BAR
Thread Starter
 
Join Date: Apr 2005
Posts: 375
Default Re: Analogue output from WB O2

I going to be re-selling them.
So Ive justifed one of each.
Let the customer choose what he thinks suits him best.

Just trying to get a handle on the features.
You think you know it all but then a question like this comes up and you go Hummm not really sure.
chinoy is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
baker_jeff
Hybrid/Tech
2
07-03-2006 01:40 PM
baker_jeff
General Discussion
1
07-03-2006 01:12 PM
crx2fast
General Discussion
0
03-20-2006 08:25 AM
bmxunderground
Forced Induction
7
09-19-2003 10:12 AM
neoboi
Forced Induction
3
03-03-2003 11:10 PM


Thread Tools
Search this Thread
Quick Reply: Analogue output from WB O2


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.