ALL YOU ECU GUYS....
Recently bought a 92 civic hatchback VX......With an engine swap of a D16z6..Just finished up the turbo kit today and took the ecu to be chipped finding out I actually have a p07 Ecu and a wideband from the VX running my d16z6... He said he wasnt farmiliar with what it would do so we went ahead and chipped the ecu with a p28 bin of a website...Just curious to know if this will work with the car being a d16z6 with a p07 ecu still running the factory wideband for the VX.... Any help or imput will be great....Also if this wont work what can i do??????
|
Re: ALL YOU ECU GUYS....
you wasted your money getting it chipped, wont work. i have a chipped p28 ready to go for 140 shipped (shameless plug)
|
Re: ALL YOU ECU GUYS....
which p07 do you have? 5-wire o2?
|
Re: ALL YOU ECU GUYS....
Yea I have the 5 wire po7 ecu.....
And i didnt waste my money he said if it didnt work I could get a p28 and he would rechip |
Re: ALL YOU ECU GUYS....
5 wore p07 wont read an eprom
|
Re: ALL YOU ECU GUYS....
So it would be pointless to even try....If so what can be done to the car to make work ....I know i will need a p28 ecu but what about the 5wire o2????
|
Re: ALL YOU ECU GUYS....
Originally Posted by primed16
So it would be pointless to even try....If so what can be done to the car to make work ....I know i will need a p28 ecu but what about the 5wire o2????
|
Re: ALL YOU ECU GUYS....
The socketed P07 will run... wierd... and VTEC engagement will be glitchy and laggy. I wouldn't trust it on a turbo engine. The secondary MCU is sending interrupts to the primary that the primary (running off the chip) isn't ready for and just eats critical clock cycles.
You need some other Civic/Integra ECU, either VTEC or converted to VTEC. Then, you need to do the pinout/wiring changes to go from P07 to normal OBD1.
Originally Posted by whiterice
which p07 do you have? 5-wire o2?
|
Re: ALL YOU ECU GUYS....
"Then, you need to do the pinout/wiring changes to go from P07 to normal OBD1."
If you could give me a little more information on this it would be helpful.....???/ im not really understanding the whole p07 to normal obd1 |
Re: ALL YOU ECU GUYS....
Factory service literature, located at the top of Hybrid/Tech Forum, tells you everything I know and provides purdy pictures to boot.
|
Re: ALL YOU ECU GUYS....
p07's are like baby seals, but in this case you skin them of thier 5050S's lol
|
Re: ALL YOU ECU GUYS....
I'm still not finding anything in the hybrid section that is useful.....but i did find this......http://hondaswap.com/swap-articles/v...or-info-13759/
It said its for a b-series swap and i have a d-series so would this be the same or what.....????? |
Re: ALL YOU ECU GUYS....
If you can't find the service literature at the top of the goddamn Hybrid/Tech forum, you are not worth helping further.
Goodbye! |
Re: ALL YOU ECU GUYS....
# 1 I didn't specifically ask for your GODDAMN help.....!!!!
# 2 doesn't mean I didn't find service literature ...Because I Found that and if the GODDAMN links weren't fucked up it wouldn't be a problem im sure.....I was asking if that page I posted is right since the links don't work.... GOODBYE |
Re: ALL YOU ECU GUYS....
Originally Posted by primed16
# 1 I didn't specifically ask for your GODDAMN help.....!!!!
Originally Posted by primed16
# 2 doesn't mean I didn't find service literature ...Because I Found that and if the GODDAMN links weren't fucked up it wouldn't be a problem im sure.
|
Re: ALL YOU ECU GUYS....
WELL give yourself a cookie I'm sure if you can do it someone else can do it just as good....
GOODBYE Post can be deleted....I will get help elsewhere |
Re: ALL YOU ECU GUYS....
|
Re: ALL YOU ECU GUYS....
Originally Posted by Joseph Davis
There is no other kind.
|
Re: ALL YOU ECU GUYS....
The info that is out there is not the truth.
|
Re: ALL YOU ECU GUYS....
Originally Posted by Joseph Davis
The info that is out there is not the truth.
|
Re: ALL YOU ECU GUYS....
I keep asking for code dump from said ecu, no one can provide one. What number is on your mcu anyway?
|
Re: ALL YOU ECU GUYS....
Originally Posted by Joseph Davis
I keep asking for code dump from said ecu, no one can provide one. What number is on your mcu anyway?
dont know what o2 it had but it was the same baord jdm ----- katman shows on ff-squad that is chippable |
Re: ALL YOU ECU GUYS....
Originally Posted by primed16
WELL give yourself a cookie I'm sure if you can do it someone else can do it just as good....
GOODBYE Post can be deleted....I will get help elsewhere cool later hmt is worthless |
Re: ALL YOU ECU GUYS....
Here's some part numbers from SL Honda to reference. Looks to be 93-95 California VX with the 4-wire o2. I'll see what mcu and ecu I have when I get home. Today is another 12 hour day.
http://img230.imageshack.us/img230/7337/vxfp4.jpg |
Re: ALL YOU ECU GUYS....
The po7 boards that can be chipped are 02D011F0-1500 or 02D01720-1500....and the other model which I have is worthless...It will not read eprom...
|
Re: ALL YOU ECU GUYS....
Originally Posted by primed16
The po7 boards that can be chipped are 02D011F0-1500 or 02D01720-1500....and the other model which I have is worthless...It will not read eprom...
|
Re: ALL YOU ECU GUYS....
yea i doubt that....
|
Re: ALL YOU ECU GUYS....
Haha n00b tried to spank me on ECUs. You get points for moxie, but you are six years behind me.
|
Re: ALL YOU ECU GUYS....
so my P07-L02 has the 11F0 board with a M66207-303 mcu.
the 303 bin is posted at pgmfi. |
Re: ALL YOU ECU GUYS....
Originally Posted by primed16
yea i doubt that....
you got your answer and more you act liek we should give you a hand job with the answers you belong at froums more like honda-tech not hmt |
Re: ALL YOU ECU GUYS....
I have no respect for someone who thinks they know everything in the world....Not one thing that was said in the post was useful to me at all....And I did find my information else where the car is rewired and running great thinks to other guys at honda-tech.com....So yea if im gonna get help maybe i do belong there
|
Re: ALL YOU ECU GUYS, HMT RULES....
I know your comment wasn't directed at me. I know how you feel, but it's hard to help someone that cannot search hmt/ht/or pgmfi.
It's common knowledge which boards are chippable. If you would have just posted which ecu you have then I could have told you whether there was a chance you had the chippable board. I don't mind helping newer members out as long as they put some effort into addressing the issue. |
Re: ALL YOU ECU GUYS....
Originally Posted by primed16
I have no respect for someone who thinks they know everything in the world....Not one thing that was said in the post was useful to me at all....And I did find my information else where the car is rewired and running great thinks to other guys at honda-tech.com....So yea if im gonna get help maybe i do belong there
|
Re: ALL YOU ECU GUYS....
This is the nicest HMT thread I have ever read for some complete asshat noob.
You should consider yourself blessed that this did not turn into an 8 page HMT proper ass pounding. HMT never ceases to amaze me ... *tear* |
Re: ALL YOU ECU GUYS....
Enjoy Honduh-Tech buddy. ::)
|
Re: ALL YOU ECU GUYS....
Will do buddy ::)
|
Re: ALL YOU ECU GUYS....
Originally Posted by primed16
Will do buddy ::)
|
All times are GMT -5. The time now is 12:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands