Morphina

i wanna know the goods and bads of these type of gause well best called as wanna be widebands i think....

t_cel_t

the gauges arent bad, its the sensors that run them. most use narrow bands and the voltage from 14afr to 15 afr could be a really big jump
you can use a narrow band gauge but a wideband sensor that you have programmed for the output that the gauge wants, i think most are 0-5v.

d-man

If you have an LC-1 you can use the wideband o2 and program it for the correct output to run the gauge properly.

I believe xenocron sells them.

dispocrx

he was asking about the Autometer style...I was also wondering about this...like using a wideband sensor and using the autometer guage to tap into the wideband? i dunno

Bone1

Lightshow, but useful to me.

It saved me quite a few times.

No good for tuning though.

Was making a pass on 75 shot, pulled 4th gear, AM AF was dead read.....lifted. The hose from the ZEX NMU to the FPR had come off, I was running 75 shot but no extra fuel!!!!!!!

I also used when I was going for MPG, you can tell when the injectors are shutoff as your coasting down. I had also altered the TPS setting so I could crack the throttle open slighty so not to slow the car down coasting, but still not have the injectors come back online.