crx2fast

ok see how these 450's have the rubber grommet thingys missing on the top of the 2 injectors on the left hand side. and also the other very top ones on the 3 on the left side..
you think this will cause a problem when fitting them into my fuel rail? or can i take the ones off my stock injectors if there is any? any info would be great..

i just want to make sure its not gonna cause a fitment problem.

these will be going on an odd0 car. 91 crx

thanks guys...

crx2fast

ment to put this in Engine Management whoops

StanB

If you are referring to the orange color O-ring, yes you need them or fuel will leak when they are installed. You can use the O-ring from any other injectors because that's what I had to do with mine.

Loserkidwac

When i did mine i just went to NAPA and got a fuel injector seal kit or something like that they will know what you mean and it had the o-ring for the top, that rubber spacer between the fuel rail and the injector plus the ones for in the intake mani, I believe they were close to $10 for each injector but worth it just to ensure froma fuel leak...and yes the stock ones will work...I have a 91 crx si and used dsm 390cc so should be identical situation, hope that helps, and thanks for the stickers!!

crx2fast

alright thanks guys

90accordIHI

your stockers should be fine on those