93 lude injectors and fpr plz help
 

can that be done i read in the turbo projects that jeff did this on his red si but he used a btm can i do this but crank my timming back 5 degrees and be somewhat on the safe side thanks for the info by the way the lude injectors are 345 and i would set the fpr at like 32psi or so and do i have to modify the fuel rail to install them? i want to run 8psi on dohc zc with kkk k14 turbo will i need to run an fmu ????

Re: 93 lude injectors and fpr
 

What happened to the basemap you wanted burned?

Re: 93 lude injectors and fpr
 

not enuf time dont like doin bissnes on the site and i am lookin at xenocron if i was goin to get a base map or if some one had the full package injectors and ecu rufly tuned 4 my set up

Re: 93 lude injectors and fpr plz help
 

get an fmu boost 15 pounds and be done with it, much easier.

what you described may be fine since you seem to want to cheap out and not really tune anything but just have a turbo ride y0!

you are getting a lot of negitive input cause most of your posts are dumb and have been covered. the easiest way and almost the cheapest after you hassle with the ---- your trying is to
1. get a chipped ecu
2. get a basemap since we all know you will never acually tune your car cause you are eighter too dumb or too ignorant
3. get a rope

these are the steps you should take to get your car where you want it.

PS the car will still go into limp mode with the injectors and fpr you want to use untill you solve the problem with the map sensor seeing boost. you can go back to 1990 and use the cutting edge technology of fishtank check valves or a missing link that would work well with what seems to be the theme of the car you are building.