7.5.1 comp ratio

Reply Subscribe

Thread Tools

Search this Thread

01-23-2006, 08:43 PM

bennyhonda7

1.0 BAR

Thread Starter

Join Date: May 2005

Posts: 326

7.5.1 comp ratio

can i even use this setup? i have already put the motor together can i still obtain decent hp numbers with this setup and geta better head later...ie y8?

01-23-2006, 08:57 PM

Ogubudiah

1.5 BAR

Join Date: Oct 2004

Posts: 1,167

Re: 7.5.1 comp ratio

yeah you can use that, but if your looking for decent numbers all motor wise then start over

01-24-2006, 01:11 AM

tr4cti0n.i55ues

1.5 BAR

Join Date: Nov 2005

Posts: 667

Re: 7.5.1 comp ratio

boosted it will be ok not the best but do able. 1st gen eclipses have like a 7.8 cr so it is possible to make big power on a low cr but it will take longer to spool the turbo and will be slow as ---- off boost

01-24-2006, 02:51 AM

90dx

3.0 BAR

Join Date: Jul 2004

Posts: 4,029

Re: 7.5.1 comp ratio

What setup is that?I assume you have already hunted down the thinnes head gasket you could find as well?

01-24-2006, 12:57 PM

jeffescortlx

1.0 BAR

Join Date: Oct 2004

Posts: 623

Re: 7.5.1 comp ratio

Well the good new's is you can run a ton of boost on crappy gas and still make some good numbers.

01-24-2006, 03:42 PM

bennyhonda7

1.0 BAR

Thread Starter

Join Date: May 2005

Posts: 326

Re: 7.5.1 comp ratio

well here is the other problem TIMING...lol...so i just dropped my a6 a full 2 points of cr...so i should double timing correct...it would make sense....the motor only runs on 32-35 degree of timing? so wtf?

01-24-2006, 03:56 PM

jeffescortlx

1.0 BAR

Join Date: Oct 2004

Posts: 623

Re: 7.5.1 comp ratio

I cant say for sure with your set up, but I have a low compression motor also. I have the timing at stock N/A and run over 17psi with out getting any knock on pump gas.

01-24-2006, 07:59 PM

bennyhonda7

1.0 BAR

Thread Starter

Join Date: May 2005

Posts: 326

Re: 7.5.1 comp ratio

yeah then why wouldnt mine run on na timing....it misfires and shakes and ----...lol...i guess maybe i should try cam timing retard my cam until i can get the dizzy close to stock na timing?