HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   450's and TurboEdit problems (https://www.homemadeturbo.com/engine-management-10/450s-turboedit-problems-19129/)

BNThomas1978 04-19-2004 05:11 PM

450's and TurboEdit problems
 
I have some Blacktop 450's that plug right into my CRX with no problem at all, and a Turbo Edit chipped PM6 ECU, and the car runs like ----, Idels like crap anytime on the gas it sputters and pops, throws the MAP code anytime it sees boost. Whats the problem here, I thought this setup was suppose to work "GREAT". If I put the stock injectors back in with just the FMU , it works alot better, No MAP codes,Idels fine just falls on its face with anymore than half throttle. Im not happy with the chip I ordered for my ECU , it was ordered for my 8 psi D16y7 setup in my 90 CRX using the PM6 ECU. We'll it runs like crap.

If anyone else has had problems with this or any fix's. let me know.

Thanks, Bryan

Reddy 04-19-2004 05:14 PM

Re:450's and TurboEdit problems
 
The setup is "GREAT" if you know what your doing and know how to tune it. Naturally its going to run like ass if its tuned like ass. The equiptment is only as good as the person using it.

The stock injectors and FMU don't require tuning or knowledge on how to use them thats probably why it ran fine and if thats what you want to do than take the TE out cause it sounds like TE is not for you.


Also, this should be in engine management.

Semnos 04-19-2004 05:18 PM

Re:450's and TurboEdit problems
 
maybe you soldered the ZIF socket incorrectlym looks like you're going into limp mode

BNThomas1978 04-19-2004 05:19 PM

Re:450's and TurboEdit problems
 
Iv'e had it tunned, Iv'e been told that maybe I have a bad chip, or the guy I bought it from sold me the wronge chip for my setup. can anyone else burn me a chip and sale it to me. But if this doent work next time, Im just gonna get Hondata.

BNThomas1978 04-19-2004 05:21 PM

Re:450's and TurboEdit problems
 
I bought the entire ECU from a guy on here that was running the same setup, and he said he got Hondata, so he was just selling his old stuff.

surfer 04-19-2004 08:48 PM

Re:450's and TurboEdit problems
 
hondata is expensive poop, stick with TE2 and get yourself a chip burner, they arent expensive, get reading up on tuning and have a pop yourself its not all that difficult

TurboEF9 04-19-2004 08:51 PM

Re:450's and TurboEdit problems
 
User error. >:(

Chris Harris 04-19-2004 09:16 PM

Re:450's and TurboEdit problems
 
BN, you just need to come to TurboEdit class next sunday!


TurboEF9 04-19-2004 10:09 PM

Re:450's and TurboEdit problems
 
Or maybe he's a retard who burned an NA map thinking it would control his 450s.

..ignorance really pisses me off, especially when directed towards something that a lot of people have worked really hard on.


..before you start saying it's TurboEDIT, why don't you exhaust all of your options of troubleshooting. Could it be your shitty injectors? Could you have bought a setup that the prevous idiot couldn't get to work because he burned the wrong maps also? Sheesh.

Dr.Boost 04-19-2004 10:10 PM

Re:450's and TurboEdit problems
 

Originally Posted by BNThomas1978
I bought the entire ECU from a guy on here that was running the same setup, and he said he got Hondata, so he was just selling his old stuff.

You can't run a chip from another car. Even if he has the same motor and ----, it won't be the same. When you say it was tuned, how was it tuned? Who tuned it?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote


All times are GMT -5. The time now is 04:30 PM.


© 2024 MH Sub I, LLC dba Internet Brands